详情描述

The YingTeng FP series fan coil units incorporate advanced technologies from both domestic and international counterparts. In accordance with national standards, after numerous trials and measurements, a series of technical design improvements have been efficiently implemented, resulting in superior performance, wide applications, a complete range of types, high efficiency, and low noise. The series includes horizontal concealed, horizontal exposed, vertical concealed, vertical exposed, and cassette units. When paired with fresh air handling units, they are extensively used in low-noise environments such as hotels, hospitals, office spaces, high-end conference halls, and exhibition halls, making them an ideal terminal unit for centralized air conditioning systems.

Product Specifications

Model: FP34 (WA)

Brand: YingTeng

Airflow (m³): 340

Cooling Capacity (W): 1800

Heat (W): 2700

Noise dB(A): ≤37

Cold water supply temperature: 7℃-12℃

Supplying hot water temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power Supply: 220V/50Hz

Inlet and outlet pipes: ZG 3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 740 x 475 x 246


Note: The data in the table is the measured value under the test conditions specified by the national standard for "Fan Coil Units" (GB/T 19232-2003).

1. Cold supply operating parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.

Inlet water temperature: 7°C, outlet water temperature: 12°C.

Heating operation parameters:进口 air dry bulb temperature DB=21°C, incoming water temperature 60°C.

2. Noise Measurement: Values measured at a distance of 1 meter in front and above the equipment in an anechoic chamber.

3. Standard configuration for vertical concealed units features an outdoor static pressure of 12 Pa.

4. Water resistance refers to the resistance at the rated flow; input power refers to the power input at high airflow.

5. When selecting a combination of cold and hot twin-coil unit, refer to the main technical parameters in the table above. One row of heat is approximately 40% of three rows of heat, low static...

The air volume loss of the pressurizing unit is approximately 10%, and the static pressure loss of the high static pressure unit is about 20%.

Product Features

Vertical exposed, horizontal exposed, vertical concealed, horizontal concealed, ceiling-mounted, cabinet-style, wall-mounted, and more series.

Low overall height, saving construction space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.

The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.

The water collection tray is fully molded, and the insulation is applied using an integrated pressure bonding technique, eliminating concerns of condensation.

Equipped with exhaust and drain functions, ensuring adequate heat exchange and preventing pipe cracking due to freezing.

The cooler is made by mechanical bending of copper tubes and high-efficiency aluminum fins.

The unit is equipped with an efficient aluminum finned heat exchanger and a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

Precision design allows for the selection of either left or right-hand coils for ordering. An optional automatic temperature control unit can be provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)

The motor is a energy-saving fixed-phase capacitor motor, featuring imported high-precision steel ball bearings that can be self-lubricated. The motor shafts are all treated with quenching and special hard-chromium processing for long-lasting durability and ease of disassembly at fixed points. The motor lead wires are all protected by metal flexible hoses, in compliance with international standards.

Standard coiled duct outlet static pressure is 0~12Pa, pressure retaining type outlet static pressure is 30Pa (or ≤50Pa), with code H.

The water tray and insulation are molded, with an overall adhesive bonding process, ensuring solid durability without weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Baosteel Shanghai, surface-coated with plastic spray, while the concealed piping is made of galvanized steel or fingerprint-resistant steel.

The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and extremely low air resistance.