详情描述

The YingTeng FP series fan coil units integrate advanced technologies from similar products both domestically and internationally. Designed in accordance with national standards and after numerous trials and measurements, they have achieved a series of technical design improvements with high efficiency. As a result, they offer superior performance, wide application, a complete range of types, high efficiency, and low noise. The series includes horizontal concealed, horizontal exposed, vertical concealed, vertical exposed, and cassette unit types. When paired with fresh air handling units, they are widely used in hotels, hospitals, office spaces, high-end conference halls, and exhibition halls, where low noise is required, making them an ideal terminal device for centralized air conditioning systems.

Product Specifications

Model: FP34 (LM)

Brand: Yingten

Airflow (m³): 340

Cooling Capacity (W): 1800

Heat (W): 2700

Noise db(A): ≤37

Cold Water Supply Temperature: 7℃-12℃

Hot Water Supply Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power: 220V/50Hz

In and Out Pipe: ZG3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 750 x 260 x 640


Note: The data in the table is the measured value under the test conditions specified in the national standard for "Fan Coil Unit" (GB/T19232-2003).

1. Cooling operation parameters: Inlet dry bulb temperature DB = 27℃, wet bulb temperature WB = 19.5℃.

Cold water intake temperature: 7°C, outlet water temperature: 12°C.

Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.

2. Noise Measurement: Values measured at a distance of 1 meter in front of and above the equipment, within an anechoic chamber.

3. Standard configuration for vertical concealed units features an outdoor static pressure of 12 Pa.

4. Water resistance refers to the resistance at rated flow; input power is the power at high airflow.

5. When selecting a combination of cold and hot twin-tube unit, refer to the main technical parameters in the table above. A row of heat is approximately 40% of three rows of heat, low static...

Airflow loss in pressurizing units is approximately 10%, and static pressure loss in high-pressure units is about 20%.

Product Features

Available in horizontal surface mount, horizontal concealed mount, vertical surface mount, vertical concealed mount, ceiling mount, cabinet-style, wall-mounted, and other series.

Low overall height, saving building space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.

The entire unit is made of hot-dip galvanized steel, copper pipes, and aluminum fins, offering strong corrosion resistance.

The water pan is fully molded, and the insulation uses a whole-press bonding technique, eliminating concerns about condensation.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.

The cooler employs copper tubes and high-efficiency aluminum fins, mechanically expanded for processing.

The unit employs an efficient aluminum finned heat exchanger with a low-noise fan configuration, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

精密 design allows for either left or right coil style to be selected for ordering. An automatic temperature control unit can be customized upon request to maintain constant temperature in the controlled area; (Temperature control unit to be ordered separately)

The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat-treated and chrome-plated for durability, with easy disassembly at the fixed points. The motor leads are protected by metal hoses, conforming to international standards.

The static pressure at the common coil outlet is 0~12Pa, while the static pressure at the residual pressure outlet is 30Pa (or ≤50Pa), with the code H.

The water tray and insulation are molded, with an overall adhesive bonding process, ensuring durability without weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Baosteel Shanghai, which are surface-coated. The concealed piping is made from galvanized steel or fingerprint-resistant steel.

Coiled tubing materials are made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes in an interlaced arrangement, which boasts extremely high thermal conductivity and low air resistance.