详情描述

The YingTeng FP series fan coil units incorporate advanced technologies from similar products domestically and internationally. Compliant with national standards and after numerous trials and tests, they have efficiently completed a series of technical design improvements, resulting in superior performance, wide applications, a complete range of types, high efficiency, and low noise. The series includes horizontal concealed, horizontal exposed, vertical concealed, vertical exposed, and cassette units. When paired with fresh air handling units, they are widely used in low-noise environments such as hotels, hospitals, office spaces, high-end conference halls, and exhibition halls, making them an ideal terminal device for centralized air conditioning systems.

Product Specifications

Model: FP170 (LM)

Brand: YingTeng

Airflow (m³): 1700

Cooling Capacity (W): 9000

Heat (W): 13,500

Noise dB(A): ≤48

Cold Water Supply Temperature: 7℃-12℃

Hot Water Supply Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30 Pa / 50 Pa

Power: 220V/50Hz

In-and-out pipes: ZG 3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height, mm): 1680 x 260 x 640


Note: The data in the table is the measured value under the test conditions specified by the national standard for "Fan Coil Unit" (GB/T19232-2003).

1. Supply cooling operating parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C;

Inlet water temperature for cold water: 7℃, outlet water temperature: 12℃.

Heating工况parameters: Imported air dry bulb temperature DB=21℃, incoming water temperature 60℃。

2. Noise Measurement: Values measured at 1 meter forward and upward from the front of the unit within an anechoic chamber.

3. Standard configuration of the vertical concealed unit features an outdoor static pressure of 12 Pa.

4. Water resistance refers to the water resistance at the rated flow rate; input power refers to the input power at high airflow.

5. When selecting a combination cold and hot twin tube unit, refer to the main technical parameters in the table above. One row of heat is approximately 40% of three rows of heat, low static...

The air volume loss of the pressurizing unit is approximately 10%, and the static pressure loss of the high static pressure unit is about 20%.

Product Features

Available in horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, wall-mounted, and more series.

Low overall height, saving architectural space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to diverse usage requirements.

The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.

The drip pan is fully molded, and the insulation uses an integrated pressure bonding process, eliminating concerns about condensation.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.

The heat exchanger is made of copper tubes and high-efficiency aluminum fins, processed through mechanical bending.

The unit employs an efficient aluminum finned heat exchanger with a low-noise fan configuration, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

Precise design allows for either left or right-style coils to be selected for ordering. If required by the customer, an automatic temperature control unit can be provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)

The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision ball bearings that are self-lubricating. The motor shafts are all tempered and treated with hard chrome for durability, with ease of disassembly at the fixed points. The motor leads are all protected by metal hoses, complying with international standards.

The static pressure of the regular coiled outlet is 0~12Pa, while the static pressure of the residual pressure outlet is 30Pa (or ≤50Pa), with the code H.

The water tray and insulation are molded, with an overall adhesive bonding process, ensuring strength, durability, and seamless construction. The appearance is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made from sheet metal produced by Baosteel Shanghai, which is coated with plastic spray, while the concealed piping is made from galvanized steel or fingerprint-resistant steel.

The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and minimal air resistance.