详情描述

The YingTeng FP series fan coil units incorporate advanced technologies from both domestic and international counterparts. In accordance with national standards, after numerous trials and measurements, a series of technical design improvements have been efficiently achieved, resulting in superior performance, wide application, a complete range of types, high efficiency, and low noise. The series includes horizontal concealed, horizontal exposed, vertical concealed, vertical exposed, and cassette units. When paired with fresh air handling units, they are extensively used in low-noise environments such as hotels, hospitals, office spaces, high-end conference halls, and exhibition halls, making them an ideal terminal device for centralized air conditioning systems.

Product Specifications

Model: FP204 (LM)

Brand: YingTeng

Airflow (m³): 2040

Cooling Capacity (W): 10800

Heat (W): 16,200

Noise dB(A): ≤50

Cold Water Supply Temperature: 7℃-12℃

Supplying Hot Water Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power Supply: 220V/50Hz

In and Out Pipe: ZG3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 1795 x 260 x 640


Note: The data in the table is the measured value under the test conditions specified in the National Standard for "Fan Coils Unit" (GB/T19232-2003):

1. Supply cold condition parameters:进气 dry bulb temperature DB = 27℃, wet bulb temperature WB = 19.5℃;

Cold water inlet temperature: 7°C, outlet temperature: 12°C.

Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.

2. Noise Measurement: Values measured at 1-meter distances from the front and above/below the equipment in an anechoic chamber.

3. Standard configuration for vertical concealed units features an outdoor static pressure of 12 Pa.

4. Water resistance refers to the water resistance at the rated flow rate; input power refers to the input power at the high airflow setting.

5. When selecting a combination cold and hot twin tube unit, refer to the main technical parameters in the table above. A row of heat output is approximately 40% of three rows, low static...

The air volume loss of the press unit is approximately 10%, and the static pressure loss of the high static pressure unit is about 20%.

Product Features

There are horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, wall-mounted, and other series.

Low overall height, saving building space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to diverse usage requirements.

The entire unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong corrosion resistance.

The water tray is fully molded, and the insulation is achieved through a full-pressure bonding process, eliminating concerns about condensation.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.

The condenser is made by mechanical bending of copper tubes and high-efficiency aluminum fins.

The unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

精密 design allows for optional left or right side ordering of coils. An automatic temperature control unit can be custom-ordered for users who require it, ensuring constant temperature control in the controlled area; (Temperature control unit to be ordered separately)

The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat-treated and chrome-plated for durability, with easy disassembly at the fixed points. The motor leads are protected by metal hoses, complying with international standards.

The static pressure of the standard coiled air outlet is 0~12Pa, while the static pressure of the residual pressure air outlet is 30Pa (or ≤50Pa), with the code H.

The water tray and insulation are molded, with an overall adhesive bonding process, ensuring durability without weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made from sheet metal produced by Baosteel Shanghai, which is surface-coated with plastic. The concealed piping is made from galvanized steel or fingerprint-resistant steel.

The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and minimal air resistance.