详情描述

The Yinteng FP series fan coil units have absorbed the advanced strong points of similar products at home and abroad, in accordance with national standards, and after repeated trial production and testing, have efficiently completed a series of technical design improvements. Thus, they offer superior performance, wide application, a complete range of types, high efficiency, and low noise. The series includes horizontal concealed, horizontal exposed, vertical concealed, vertical exposed, and cassette units. When paired with fresh air handling units, they are widely used in hotels, hospitals, office spaces, high-end conference halls, exhibition halls, and other low-noise environments, making them an ideal terminal device for centralized air conditioning systems.

Model: FP34 (BG)

Brand: YingTeng

Airflow (m³): 340

Cooling Capacity (W): 1800

Heat (W): 2700

Noise db(A): ≤37

Cold Water Supply Temperature: 7°C - 12°C

Hot Water Supply Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power: 220V/50Hz

In and Out Water Pipes: ZG3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 785 x 150 x 290

Note: The data in the table is the measured value under the test conditions specified by the national standard for "Fan Coils Unit" (GB/T19232-2003).

Supply cold condition parameters:进气 dry bulb temperature DB=27°C, wet bulb temperature WB=19.5°C;

Cold water inlet temperature: 7℃, outlet temperature: 12℃.

Heating operating parameters:进口 air dry bulb temperature DB=21℃, incoming water temperature 60℃.

2. Noise Measurement: Values measured at 1 meter above and below the front of the unit in an anechoic chamber.

3. Standard configuration of vertical concealed units features an outdoor static pressure of 12 Pa.

4. Water resistance refers to the water resistance at rated flow; input power refers to the input power at high airflow.

5. When selecting a combination cold and hot twin coil unit, refer to the main technical parameters in the table above. One row of heat is approximately 40% of three rows of heat, low static...

The air volume loss of the press machine is approximately 10%, and the static pressure loss of the high-pressure unit is about 20%.

Product Features

Vertical exposed, horizontal exposed, vertical concealed, horizontal concealed, ceiling-mounted, cabinet-style, wall-mounted, and more series available.

Low overall height, saving architectural space.

High cooling (heating) capacity, low noise, three-speed motor to adjust air volume, meeting various usage requirements.

The whole unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.

The drip pan is fully molded, and the insulation uses a whole-pressure bonding technique, eliminating concerns of condensation.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.

The condenser is made by mechanical expansion of copper tubes and high-efficiency aluminum fins.

The unit is equipped with an efficient aluminum finned heat exchanger and a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

精密 design allows for the selection of either left or right-hand coils for ordering. An automatic temperature control unit can be custom-made upon request to maintain a constant temperature in the controlled area; (temperature control unit to be ordered separately)

The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that can self-lubricate. The motor shafts are all tempered and treated with hard chrome for durability, easy disassembly at fixed points. The motor leads are all protected with metal hoses, meeting international standards.

Standard coil outlet static pressure is 0~12Pa, pressure retaining outlet static pressure is 30Pa (or ≤50Pa), with code H.

The water pan and insulation are molded, with an entire adhesive bonding process, ensuring durability and absence of weld marks; the appearance is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe fittings are made from sheets produced by Shanghai Baosteel, with a spray painting finish; the concealed pipe fittings are made from galvanized steel or fingerprint-resistant steel plates.

The coil material is made of seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil housing is lined with sound-absorbing and insulating materials, with the copper tubes arranged in an interlaced pattern, offering exceptional thermal conductivity and low air resistance.