详情描述

The YingTeng FP series fan coil units incorporate advanced technologies from both domestic and international counterparts. Compliant with national standards and after numerous trials and tests, they have achieved a series of technical design improvements with high efficiency. As a result, they offer superior performance, wide applications, a complete range of types, high efficiency, and low noise. The series includes horizontal concealed, horizontal exposed, vertical concealed, vertical exposed, and cassette units. When paired with fresh air handling units, they are extensively used in low-noise environments such as hotels, hospitals, office spaces, high-end conference halls, and exhibition halls, making them an ideal terminal device for centralized air conditioning systems.

Model: FP85 (BG)

Brand: YingTeng

Airflow (m³): 850

Cooling Capacity (W): 4500

Heat (W): 6750

Noise dB(A): ≤43

Cold Water Supply Temperature: 7℃-12℃

Hot Water Supply Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power: 220V/50Hz

In-and-out pipe: ZG3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 1030 x 180 x 300

Note: The data in the table are measured values under test conditions as specified in the national standard for "Fan Coil Unit" (GB/T19232-2003).

1. Cooling supply parameters: Inlet dry bulb temperature DB=27°C, wet bulb temperature WB=19.5°C.

Cold water inlet temperature: 7℃, outlet temperature: 12℃.

Heating operation parameters: Inlet air dry bulb temperature DB=21°C, incoming water temperature 60°C.

2. Noise Measurement: Values measured at 1 meter above and below the front of the unit, within the anechoic chamber.

3. Standard configuration of the vertical concealed unit features an outdoor static pressure of 12 Pa.

4. Water resistance refers to the water resistance at the rated flow rate; input power refers to the input power at the high airflow setting.

5. When selecting a combined cold and hot dual-coil unit, refer to the main technical parameters in the table above. One row of heat is approximately 40% of three rows of heat, low static...

Airflow loss in pressurizing units is approximately 10%, while static pressure loss in high static pressure units is about 20%.

Product Features

Available in horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, wall-mounted, and more series.

Low overall height, saving architectural space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, meets various usage requirements.

The entire unit is made of hot-dipped galvanized sheet, copper tubes, and aluminum fins, offering strong rust resistance.

The drip pan is formed by a whole molding process, and the insulation is achieved through an integrated pressure bonding technique, eliminating concerns about condensation.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.

The evaporator is made of copper tubes and high-efficiency aluminum fins, mechanically expanded.

The unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

Precise design allows for the selection of either left or right hand coils for ordering. Upon customer request, an automatic temperature control unit can be provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)

The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat treated and chrome-plated for durability, with easy disassembly at the fixed points. The motor leads are protected by metal hoses, meeting international standards.

Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.

The water tray and insulation are molded, with an overall adhesive bonding process, ensuring solid durability without weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe is made from plates produced by Baosteel Shanghai, which are surface-coated. The concealed pipe is made from galvanized steel or fingerprint-resistant steel plates.

The coiled tubing is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The interior of the coil box is lined with sound-absorbing and insulating materials. The copper tubes are arranged in an interlaced pattern, offering exceptional heat transfer performance and low air resistance.