详情描述

The YingTeng FP series fan coil units incorporate advanced technologies from both domestic and international counterparts. In accordance with national standards, after numerous trials and measurements, a series of technical design improvements have been efficiently achieved, resulting in superior performance, wide applications, a complete range of types, high efficiency, and low noise. The series includes horizontal concealed, horizontal exposed, vertical concealed, vertical exposed, and cassette units. When paired with fresh air handling units, they are extensively used in low-noise environments such as hotels, hospitals, office spaces, high-end conference halls, and exhibition halls, making them an ideal terminal device for centralized air conditioning systems.

Product Specifications

Model: FP204 (KC)

Brand: YingTeng

Airflow (m³): 2040

Cooling Capacity (W): 10800

Heat (W): 16200

Noise db(A): ≤50

Cold water supply temperature: 7℃-12℃

Hot Water Supply Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power Supply: 220V/50Hz

In-and-out water pipes: ZG3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 980 x 980 x 390

Note: The data in the table is the measured value under the test conditions specified by the national standard for "Fan Coil Unit" (GB/T 19232-2003).

1. Cooling supply conditions parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.

Cold water inlet temperature: 7°C, outlet temperature: 12°C.

Heating工况parameters: Imported air dry bulb temperature DB=21℃, incoming water temperature 60℃。

2. Noise Measurement: Values measured at a distance of 1 meter in front of and above the equipment in an anechoic chamber.

3. Standard configuration for vertical concealed units features an outdoor static pressure of 12 Pa.

4. Water resistance refers to the water resistance at the rated flow rate; input power refers to the input power at the high airflow setting.

5. When selecting a combination cold and hot twin coil unit, refer to the main technical parameters in the table above. One row of heat is approximately 40% of three rows of heat, low static...

Airflow loss in pressurizing units is approximately 10%, and static pressure loss in high-pressure units is about 20%.

Product Features

We offer a range of horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-hung options.

Low overall height, saving building space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.

The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.

The drip pan is formed as a whole by molding, and heat insulation is achieved through an integral pressure bonding process, eliminating concerns of condensation.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.

The evaporator is made of copper tubes and high-efficiency aluminum fins, mechanically expanded.

The unit features an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

Precise design allows for the selection of either left or right-hand coils for ordering. If required by the customer, an automatic temperature control unit can be provided to maintain a constant temperature in the controlled area; (temperature control unit to be ordered separately)

The motor is an energy-saving fixed-phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are heat treated and chrome-plated for durability and are easy to disassemble at the fixed points. The motor leads are all protected with metal flexible hoses, conforming to international standards.

The standard coil discharge outlet static pressure is 0~12Pa, while the residual pressure discharge outlet static pressure is 30Pa (or ≤50Pa), with the code H.

The water tray and insulation are molded, with an overall adhesive bonding process, ensuring durability without weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe fittings are made from plates produced by Shanghai Baosteel, which are coated with plastic spray. The concealed pipe fittings are made from galvanized steel or fingerprint-resistant steel plates.

Coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, with the copper tubes arranged in an alternating pattern, boasting exceptional heat transfer performance and minimal air resistance.