详情描述

The YingTeng FP series fan coil units incorporate advanced technology from similar products both domestically and internationally. In compliance with national standards, after numerous trials and tests, they have achieved a series of technical design improvements with high efficiency. Thus, they offer superior performance, wide applications, a complete range of types, high efficiency, and low noise. The series includes horizontal concealed, horizontal exposed, vertical concealed, vertical exposed, and cassette units. When paired with air handling units, they are extensively used in low-noise environments such as hotels, hospitals, office spaces, high-end conference halls, and exhibition halls, making them an ideal terminal unit for centralized air conditioning systems.

Product Specifications

Model: FP85 (KC)

Brand: YingTeng

Airflow (m³): 850

Cooling Capacity (W): 4500

Heat (W): 6750

Noise db(A): ≤43

Cold Water Supply Temperature: 7℃-12℃

Supplying Hot Water Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power: 220V/50Hz

In and Out Pipe: ZG3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 830 x 830 x 390

Note: The data in the table are the measured values under the test conditions specified by the national standard "Fan Coils Unit" (GB/T19232-2003).

1. Cooling operation parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.

Inlet water temperature for cold water: 7°C, outlet water temperature: 12°C.

Heating operating parameters: Inlet air dry bulb temperature DB = 21°C, incoming water temperature 60°C.

2. Noise Measurement: Values measured at 1 meter forward and above/below the unit in the anechoic chamber.

3. The standard configuration of the vertical concealed unit has an outdoor static pressure of 12 Pa.

4. Water resistance refers to the water resistance at the rated flow rate; input power refers to the input power at high airflow.

5. When selecting a combined cold and hot twin tube unit, refer to the main technical parameters in the table above. One row of heat is approximately 40% of three rows of heat, low static...

The air volume loss of the press unit is approximately 10%, and the static pressure loss of the high static pressure unit is about 20%.

Product Features

There are series including horizontal exposed, horizontal concealed, vertical exposed, vertical concealed, ceiling-mounted, cabinet-style, wall-mounted, and more.

Low overall height, saving architectural space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, meets various usage requirements.

The complete unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust prevention capabilities.

The water pan is fully molded, and the insulation uses a whole-pressure bonding technique, eliminating concerns of condensation.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.

The evaporator is made of copper tubes and high-efficiency aluminum fins, mechanically expanded.

The unit features an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

精密 design allows for the left and right configurations to be selected at will for ordering. An automatic temperature control unit can be optionally provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)

The motor is an energy-saving fixed-phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat-treated and treated with hard chrome for durability, making them easy to disassemble and assemble at the fixed points. The motor leads are protected with metal hoses, compliant with international standards.

Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.

The water pan and insulation are molded, with an overall adhesive bonding process, ensuring durability without weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made from steel plates produced by Baosteel Shanghai, which are spray-painted for surface treatment, while the concealed piping is made from galvanized steel or fingerprint-resistant steel.

The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil housing is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and minimal air resistance.