详情描述

Inten Explosion-Proof Chilled (Hot) Water UnitProduct Specifications

Spec: 3 HP

Brand: YingTeng

Cooling Capacity: 9.1 kW (7.8 × 10^3 kcal/h)

Power: 380V/3ph/50Hz

Total Power: 2.9kW

Rated Current: 8.2A

Compressor Type: Rotary

Power: 2.3 kW

Pump Power: 0.37 kW

Flow Rate: 24m

Flow Rate: 1.6 m³/h (26.7 L/min)

Tank Capacity: 60L

Assume Size DN25

Noise: 60 dB(A)

Unit Weight: 140 kg

Dimensions: Length 680mm, Width 680mm, Height 1360mm

Ex db ib mb IIB T4 Gb / Ex db ib mb II CT4 Gb

Note: The above technical specifications are for reference only; the physical unit shall be the criterion.

The above cooling capacity is based on an ambient temperature of 35°C, an inlet water temperature of 12°C, and an outlet water temperature of 7°C.

Customizable Industrial Low-Temperature Water Chiller with Air Cooling, -5°C Customizable Industrial Low-Temperature Water Chiller with Air Cooling, -5°C Customizable Industrial Low-Temperature Water Chiller with Air Cooling, -15°C Customizable Industrial Low-Temperature Water Chiller with Air Cooling, -35°C

Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.


Inten Explosion-proof Chilled (Hot) Water UnitThe series products comply with the following standards:

GB/T 3836.1 - 2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"

GB/T 3836.2 - 2021 "Explosive Atmospheres - Part 2: Equipment protected by explosion-proof "d"隔爆外壳"

GB/T 3836.4-2021 "Explosive Atmospheres – Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"

GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"

YingTeng Explosion-proof Cold (Hot) Water Chiller UnitOperates normally under the following environmental conditions:

a) Altitude not exceeding 2,000m.

b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.

c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.

YingTengExplosion-proof Cold (Hot) Water Chiller UnitSeries models are processed with special explosion-proof technology, suitable for widespread use in Class 1 and Class 2 flammable and explosive environments. They are widely applicable in scientific research, oil, chemical industry, pharmaceuticals, power plants, and other locations where IIA, IIB level T1 to T4 groups of combustible gases and steam-air mixtures may form explosive hazards.Explosion-proof Cold (Hot) Water Chiller UnitSuited for locations with temperature requirements.Explosion-proof Cold (Hot) Water Chiller UnitInspected and certified by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center with explosion-proof certification and explosion-proof CCC certificate; features an aesthetically pleasing design, reasonable structure, and easy installation and maintenance, the full range ofExplosion-proof Cold (Hot) Water Chiller UnitInternally equipped with brand-name compressors, microcomputer intelligent control, digital display, featuring low noise, stable performance, simple operation, and safety, it is highly favored by the market. (Customizable options include explosion-proof window-type air conditioners, explosion-proof duct-type air conditioners, explosion-proof ceiling-mounted air conditioners, explosion-proof fresh air air conditioners, explosion-proof marine air conditioners, explosion-proof corrosion-resistant air conditioners, explosion-proof high-temperature air conditioners, explosion-proof cold storage air conditioners, explosion-proof modular air conditioning units, and explosion-proof multi-split air conditioning units, etc.).

YingTeng Explosion-proof Cold (Hot) Water Chiller UnitProduct Features

International brand compressors, optimized rotor structure, stable quality, reliable operation.

External expansion valve, precise control, excellent refrigeration effect.

High-efficiency heat exchange ratio in premium stainless steel plate heat exchangers, featuring a unique design of cold and hot cycle partition plates.

High-quality liquid storage unit, optimizes system operation, stable working condition.

High airflow, low noise, external rotor series axial flow fans, powerful air volume.

High-head, low-noise stainless steel pumps from international brands, stable quality.

High-efficiency internal threaded tube finned heat exchangers with unique turbulent window design, enhancing heat exchange efficiency.

Microcomputer controller with analog input/output, for precise control of unit temperature.

YingTengExplosion-Proof Cold (Hot) Water UnitComprehensive product line, meticulously crafted over years of industry experience and continuous optimization, featuring a series of high-quality chillers. The entire range employs internationally renowned brands such as Copeland, Danfoss, Panasonic, and Daikin compressors, including scroll, reciprocating, screw, semi-hermetic, and hermetic types. The units are equipped with high-efficiency copper tube fins, industrial-grade stainless steel condensers and evaporators, materials up to industrial food-grade standards. Electrical components are sourced from world-leading brands like Siemens, Schneider, and ABB. Reliable quality and exceptional performance. The Yinteng explosion-proof chillers boast compact size, low noise, high energy efficiency, long lifespan, and easy operation. A variety of refrigerants are available for selection, catering to low-temperature and special environment requirements.

The cooling machine control section utilizes a high-precision main control panel developed by Yingteng, a PLC programmable controller, a human-machine interface, and full Chinese display. It enables full-process, fully automatic computerized adjustment and control, making the unit control more precise and reliable.

YingTengExplosion-proof Cold (Hot) Water Chiller UnitCompact structure, small footprint, lightweight, easy to transport. Balanced operation for safety, low vibration, no need for complex foundations, simple installation. Automatic protection features: high/low pressure protection, compressor protection, motor overload/overheat protection, frost protection, cold water/cooling water shutdown protection, temperature-sensitive fusible plug, safety valve.