详情描述

YingTeng Explosion-proof Cold (Hot) Water Chiller UnitProduct Specifications

Spec: 10 horsepower

Brand: Yingten

Cooling Capacity: 29.5 kW (25.4×10^3 kcal/h)

Power: 380V/3ph/50Hz

Total Power: 10.5kW

Rated Current: 23.4A

Compressor Type: Scroll

Power: 8.7 kW

Pump Power: 0.75 kW

Flow Range: 27m

Flow Rate: 5.1 m³/h (85.0 L/min)

Tank Capacity: 135L

Assume Size DN40

Noise: 65 dB(A)

Airframe Weight: 310 kg

Dimensions: Length 1510mm, Width 750mm, Height 1480mm

Ex db ib mb IIB T4 Gb / Ex db ib mb II CT4 Gb

Note: The above technical specifications are for reference only, the actual product should be used as the standard.

The above cooling capacity is based on an ambient temperature of 35°C, an inlet water temperature of 12°C, and an outlet water temperature of 7°C.

Customizable Industrial Low-Temperature Chilled Water Units: -5°C Air-Cooled -15°C Air-Cooled -35°C Air-Cooled

Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.


YingTeng Explosion-proof Cold (Hot) Water UnitThe series products comply with the following standards:

GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"

GB/T 3836.2 - 2021 "Explosive Atmospheres *Part 2: Equipment protected by隔爆外壳“d”"

GB/T 3836.4-2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by “m”-type enclosures"

GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"

YingTeng Explosion-proof Cold (Hot) Water Chiller UnitOperates normally under the following environmental conditions:

a) Altitude not exceeding 2,000m.

b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.

c) There are explosion hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.

YingtengExplosion-proof Cold (Hot) Water Chiller UnitSeries models are processed with special explosion-proof technology, suitable for widespread use in flammable and explosive areas of Zones 1 and 2, and are broadly applicable in scientific research, oil, chemical, pharmaceutical, and power plant environments where there may be or could be II A, II B, T1 to T4 groups of combustible gases, steam, and air mixtures posing explosion hazards.Explosion-proof Cold (Hot) Water Chiller UnitIdeal for locations with temperature requirements.Explosion-proof Cold (Hot) Water Chiller UnitInspected and certified by the National Explosion-Proof Electrical Products Quality Supervision and Inspection Center with explosion-proof and CCC certification; aesthetically pleasing, well-designed, and features easy installation and maintenance, the full rangeExplosion-proof Cold (Hot) Water Chiller UnitInternally equipped with brand-name compressors, microcomputer intelligent control, digital display, featuring low noise, stable performance, simple operation, and reliable safety, it is highly favored by the market. (Customizable options include explosion-proof window-type air conditioners, explosion-proof duct-type air conditioners, explosion-proof ceiling-mounted air conditioners, explosion-proof fresh air air conditioners, explosion-proof marine air conditioners, explosion-proof anti-corrosion air conditioners, explosion-proof high-temperature air conditioners, explosion-proof cold storage air conditioners, explosion-proof modular air conditioning units, and explosion-proof multi-split air conditioning units, etc.).

Inten Explosion-Proof Chilled (Hot) Water UnitProduct Features

International brand compressor, optimized rotor design, stable quality, reliable operation.

External expansion valve, precise control, excellent refrigeration effect.

High-end stainless steel plate heat exchangers offer excellent heat exchange efficiency ratios and feature a unique design of cold and hot circulation partition plates.

High-quality fluid storage unit, optimizes system operation, stable working condition.

High airflow, low noise, external rotor series axial fans, powerful airflow.

High-head, low-noise, stable-quality stainless steel pumps from international brands.

High-efficiency internal threaded tube finned heat exchanger with a unique turbulent flow window design, enhancing heat exchange efficiency.

Microcomputer controller with analog input/output, for precise control of unit temperature.

YingTengExplosion-proof Cold (Hot) Water UnitA series of chillers, developed through years of industry experience and continuous optimization, features high-quality units using internationally renowned brands such as Copeland, Danfoss, Panasonic, and Daikin compressors, including scroll, reciprocating, screw, semi-hermetic, and hermetic types. The complete set is equipped with high-efficiency copper tube fins, and the condensers and evaporators are made of industrial-grade stainless steel, with materials meeting industrial food-grade standards. The electrical components are from world-renowned brands like Siemens, Schneider, and ABB. Reliable quality and excellent performance. The Yinteng explosion-proof chillers offer advantages such as compact size, low noise, high energy efficiency, long lifespan, and easy operation. Multiple refrigerants are available for selection, catering to low-temperature and special environment requirements.

The cold water machine control section utilizes a high-precision main control panel developed by Yingten, a PLC programmable controller, a human-machine interface, and full Chinese display. It allows for full-process, fully automatic computer regulation and control, making the unit control more precise and reliable.

YingTengExplosion-proof Cold (Hot) Water Chiller UnitCompact structure, small footprint, lightweight, easy to transport. Balanced operation for safety, low vibration, no need for complex foundations, simple installation. Automatic protection features: high and low pressure protection, compressor protection, motor overload and overheating protection, anti-freezing protection, water cut-off protection for cold water and cooling water, temperature-sensitive fusible plug, safety valve.