详情描述

40 HP Air-Cooled Industrial Explosion-Proof Air Conditioner in Cabinet TypeProduct Specifications

Brand: YingTeng

Spec: 40 HP

Cooling Capacity: 104.4 kW

Energy Control: 100, 75, 50%

Heating Capacity - Electric Heating: 48KW

Heating Capacity - Hot Water Heating: 100 kW

Heating Output - Steam Heating: 140KW

Airflow: 20,000 m³/h

Static Pressure Outside the Machine: 400 Pa

Engine noise: 79 dB(A)

Temperature Control Range & Accuracy: Heat/Cool (Electric Heating) Type: 18-30°C, Cool Fan Type: 20-30°C, Sensitivity: ±2°C

Power Supply: AC 380V 50Hz, 3-phase 4-wire system

Compressor Type: Scroll Full Enclosed Compressor

Nominal Input Power: 30.0 kW

Throttling Method: External Balance Type Thermal Expansion Valve

Evaporator Type: Copper Tube Suction Side Aluminum Foil Fin

Exhaust Fan Type: External Rotor Low Noise Centrifugal Fan

Number of blowers: 2

Fan Power: 7.0 kW

Filter Type: Initial Efficiency Nylon Mesh (Panel Type)

Electric heating power: 48 kW

Hot Water Heating Capacity: 100KW, Inlet Pipe Diameter: 32mm

Steam heating capacity: 140KW, inlet and outlet steam pipe diameter 32mm

Dimensions (Length × Width × Height mm): 2280×1300×1950 [2305]

Ex db ib mb IIB T4 Gb / Ex db ib mb II CT4 Gb

Manufacturer: Henan Tongteng Explosion-proof Electrical Equipment Co., Ltd.


Note: The above technical specifications are for reference only; the physical unit is the standard.

1. Refrigeration Conditions: Outdoor Temperature DB=35°C, WB=24°C; Indoor Temperature DB=27°C, WB=19°C.

2. Heating Condition: Outdoor temperature DB=7°C, WB=6°C; Indoor temperature DB=20°C.

3. The corresponding charge amounts and compressor types for the remaining refrigerants are specified in the specific data provided in the unit's random materials.

4. For refrigerant units, data other than cooling capacity, heating capacity, power, and charging amount can be referred to in the above table. For data that cannot be referenced, refer to the specific figures in the unit's random materials.

The Yinteng explosion-proof industrial air conditioning series products comply with the following standards:

GB/T 3836.1-2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"

GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"

GB/T 3836.4 - 2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9 - 2021 "Explosive Atmospheres - Part 9: Equipment protected by 'm' type enclosures"

GB/T 3836.15-2017 "Explosive Atmospheres - Part 15: Design, Selection, and Installation of Electrical Equipment"

YingTeng explosion-proof industrial air conditioners can operate normally under the following environmental conditions:

a) Altitude not exceeding 2,000m.

b) Applicable environmental conditions: Temperature -7°C to 43°C, free of corrosive gases.

c) There are explosive hazardous areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.

The "YingTeng" explosion-proof industrial air conditioning series models have been specially processed with explosion-proof technology, making them widely applicable in flammable and explosive areas in Zones 1 and 2. They are suitable for scientific research, oil, chemical, pharmaceutical, power plants, and other locations where there may be or could be IIa, Iib groups of flammable gases, steam, and air mixtures posing explosion hazards. These explosion-proof industrial air conditioners are suitable for areas with specific temperature requirements. They have passed inspection by the National Supervision and Inspection Center for Quality of Explosion-Proof Electrical Products and been issued with explosion-proof certificates and CCC certificates. The series features an aesthetically pleasing design, reasonable structure, ease of installation and maintenance. The entire series utilizes branded compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and reliable safety. They are highly favored in the market. (Customizable options include explosion-proof window-type air conditioners, explosion-proof duct-type air conditioners, explosion-proof ceiling-type air conditioners, explosion-proof fresh air air conditioners, explosion-proof marine air conditioners, explosion-proof corrosion-resistant air conditioners, explosion-proof high-temperature air conditioners, explosion-proof cold storage air conditioners, explosion-proof modular air conditioning units, and explosion-proof multi-split air conditioning units, etc.).

YingTeng explosion-proof industrial air conditioners are the latest generation of air conditioning products meticulously developed by our company, drawing upon the best of international and domestic design philosophies and refrigeration components. Each model has been tested by our authorized and recognized testing center, renowned for its aesthetic appearance, superior performance, ease of installation and maintenance, and stable reliability. The product range is comprehensive, with a variety of models to meet diverse user needs, and is widely used in various industrial fields such as steel mills, chemical plants, paper mills, printing plants, power plants, substation, food factories, garment factories, and microelectronics factories, as well as in control rooms for various electrical equipment.

Variety in form and function

Explosion-proof industrial air conditioners are categorized into three types: direct-air supply, top-air supply with front return, and top-air supply with rear return. To meet the requirements of different working environments or the specific functions of usage sites, there are derived units such as heat pumps, heat pump with electric auxiliary heating, chilled water electric heating, chilled water hot water coil, 100% fresh air, and single-cooling units for user selection. With a wide variety of types and a broad range of cooling capacities, they can satisfy the needs of air conditioning in various commercial spaces and industrial special applications.

Direct Air Delivery

Direct air supply models use bi-directional louver blowers, offering long throw distance and high air volume. They feature compact size, attractive appearance, and simple, flexible application, reducing the amount of decoration and installation work for users. Ideal for local air conditioning in medium and small spaces.

Top blowing type

Top-mounted models use ducted air delivery, allowing users to flexibly select the air delivery method and reasonably arrange the number of outlets based on the space conditions and requirements. This meets the needs for centralized management and even temperature control in large spaces. The return air methods include front return type, suitable for direct return air in independent large spaces without the need for return air ducts or equipment rooms; and rear return type, suitable for centralized air conditioning of return air in multiple independent spaces, which requires the installation of return air ducts and equipment rooms for each space.

State-of-the-art performance

The product utilizes an efficient spiral compressor, an internationally renowned horizontal thermal expansion valve, and a high-performance heat exchanger meticulously designed and manufactured. The unit has been carefully tested by an authorized CNAS-certified testing center. The products offer exceptional performance quality and unparalleled energy-saving and consumption-reduction advantages.

Evaporator

The heat exchanger utilizes high-performance internally threaded copper tubes and hydrophilic finned aluminum baffles, further enhanced by advanced mechanical expansion tube processing, achieving optimal heat exchange efficiency.

Condenser

The heat exchanger features a large-diameter corrugated fin design with aluminum, processed through advanced mechanical expansion tube technology. It maximizes adaptability to various harsh dust environments while meeting heat exchange performance and efficiency, minimizing maintenance and cleaning, and extending service life.

Microcomputer control

Microcomputer with humanized control, LCD large-screen display, equipped with RS-485 communication interface, offering ventilation/refrigeration/heating three operating modes, featuring timed on/off, power failure memory function, real-time clock display, etc.; optimized control logic, meticulously designed operating data, and full-code query and prompt for fault alarms, convenient and practical, the unit is equipped with multiple protective functions to ensure safe and worry-free operation.

Maintenance & Repair

Convenient, streamlined, and functional frame structure design, fully considering the needs for flexible installation and maintenance, making installation and repair extremely easy. Includes a double-layer initial efficiency filter with washable features, offering a long service life.

Meet customers' special requirements

Based on customer requirements, we can add units with year-round refrigeration operation, high airflow with low enthalpy difference, corrosion-resistant coating, long-connection piping, fresh air supply, shaded storage, remote control, steam heating, and hot water heating, etc.

If there are any special requirements, the dimensions and other parameters of the assembly may vary. Customers must communicate these requirements before placing an order and note them in the order details.