详情描述

30 HP Water-Cooled Cabinet Industrial Explosion-Proof Air ConditionerProduct Specifications

Brand: YingTeng

Spec: 30 HP

Cooling Capacity: 85.6 kW

Energy Control: 100, 67, 33.0%

Heating Output - Electric Heating: 42 kW

Heating Output - Hot Water Heating: 80KW

Heating Capacity - Steam Heating: 120 kW

Airflow: 17,000 m³/h

Static Pressure Outside the Machine: 350 Pa

Aircraft Noise Level: 75 dB(A)

Temperature control range and accuracy: Heating/cooling type 18 - 30°C, cooling fan type 20 - 30°C, sensitivity ±2°C

Power Supply: AC 380V 50Hz, three-phase four-wire system

Compressor Type: Scroll Full Enclosed Compressor

Nominal Input Power: 22.5 kW

Condenser Type: High-efficiency Shell-and-Tube

Flow Rate: 19 m³/h

Pipe Diameter: DN65

Throttling Method: External Balance Type Thermal Expansion Valve

Evaporator Type: Copper tube sleeve hydrophilic aluminum foil fins

Blower Type: External Rotor Low Noise Centrifugal Blower

Quantity of exhaust fans: 2

Blower Power: 5.6 kW

Filter Type: Initial Efficiency Nylon Mesh (Panel Type)

Electric heating power: 42 kW

Hot Water Heating Capacity: 80KW, Inlet Pipe Diameter: 32mm

Steam heating capacity: 120KW, steam inlet and outlet pipe diameter: 32mm

Dimensions (Length × Width × Height mm): 2150×1050×1950 [2305]

Ex db ib mb IIB T4 Gb/Ex db ib mb II CT4 Gb

Manufacturer: Henan Tongteng Explosion-proof Electrical Equipment Co., Ltd.


Note: The above technical specifications are for reference only, and the actual product should be used as the standard.

1. Refrigeration Conditions: Outdoor temperature DB=35°C, WB=24°C; indoor temperature DB=27°C, WB=19°C.

2. Heating operating condition: Outdoor temperature DB=7°C, WB=6°C; indoor temperature DB=20°C.

3. The corresponding filling amount of other refrigerants and compressor types are specified in the specific data provided in the unit's random documentation.

4. For refrigerant units, data other than cooling capacity, heating capacity, power, and charge volume can be referred to in the above table. For data not available for reference, please refer to the specific figures in the unit's random materials.

Yinteng explosion-proof industrial air conditioning series products comply with the following standards:

GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment - General Requirements"

GB/T 3836.2 - 2021 "Explosive Atmospheres *Part 2: Equipment protected by隔爆外壳“d”"

GB/T 3836.4 - 2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9-2021 "Explosive Atmospheres - Part 9: Equipment protected by an "m" type of enclosure"

GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"

Yinteng explosion-proof industrial air conditioners can operate normally under the following environmental conditions:

a) Altitude not exceeding 2,000m.

b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.

c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from groups II A, II B, and T1 to T4.

The "YingTeng" explosion-proof industrial air conditioning series has been specially processed with explosion-proof technology, making it suitable for widespread use in flammable and explosive areas in Zones 1 and 2. It is ideal for research, oil, chemical, pharmaceutical, and power plant environments where there may be or could be II A, II B, T1-T4 groups of combustible gases, steam, and air mixtures prone to explosion. Explosion-proof industrial air conditioners are suitable for locations with temperature requirements, and they have passed inspections by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center, receiving explosion-proof certification and CCC certification. They feature an aesthetically pleasing design, reasonable structure, and ease of installation and maintenance. The entire series uses brand-name compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and safety. They are highly favored in the market. (Customizable options include explosion-proof window-type air conditioners, explosion-proof duct-type air conditioners, explosion-proof ceiling-type air conditioners, explosion-proof fresh air air conditioners, explosion-proof marine air conditioners, explosion-proof anti-corrosion air conditioners, explosion-proof high-temperature air conditioners, explosion-proof cold storage air conditioners, explosion-proof modular air conditioners, and explosion-proof multi-split air conditioners, etc.).

Yinteng Explosion-proof Industrial Air Conditioners are the latest generation of air conditioning products meticulously developed by our company, drawing on the best of both international and domestic design philosophies and refrigeration components. Each model has been tested by our company's authorized testing center, renowned for its accuracy. They are celebrated for their attractive appearance, superior performance, ease of installation and maintenance, and reliability. The product range is comprehensive, with numerous models to cater to various customer needs. They are widely used in industrial fields such as steel mills, chemical plants, paper mills, printing plants, power plants, substation, food factories, garment factories, and microelectronics factories, as well as in various electrical control rooms.

Diverse in form and function

Explosion-proof industrial air conditioners are categorized into three main types: direct air supply, top air supply with front return air, and top air supply with rear return air. To meet the requirements of different working environments or the functional needs of specific usage sites, the units are derived in various types such as heat pump, heat pump with electric auxiliary heating, cold air with electric heating, cold air with hot water coil, 100% fresh air, and single cooling models. The wide range of types and capacities can cater to the air conditioning needs of various commercial spaces and industrial special applications.

Direct Air Delivery

Direct air supply type uses bidirectional louver blowing, with long air throw and high air volume. It boasts small size, attractive appearance, and simple and flexible application, reducing the amount of decoration and installation work for users. Suitable for local air conditioning in small and medium-sized spaces.

Top-mounted fan type

Top-mounted air supply models use ducted air supply, allowing users to flexibly choose the air supply method and reasonably arrange the number of air outlets based on the space conditions and usage requirements, meeting the needs of centralized management and balanced temperature control in large spaces. The return air methods include front return air type, suitable for direct return air in independent large spaces, eliminating the need for return air ducts and machine rooms; and rear return air type, suitable for centralized air conditioning of return air in multiple independent spaces, requiring the installation of return air ducts and machine rooms for each space.

Advanced performance

The product features an efficient scroll compressor, an externally piloted thermal expansion valve from an international brand, and a high-performance heat exchanger meticulously designed and manufactured. The unit has been meticulously tested by a CNAS-accredited testing center. The products offer exceptional performance quality and unparalleled energy-saving and consumption-reduction advantages.

Evaporator

The heat exchanger employs high-performance internal threaded copper tubes and hydrophilic baffle aluminum fin sheets, further enhanced by advanced mechanical expansion tube processing, achieving optimal heat exchange efficiency.

Condenser

The heat exchanger features a large-diameter corrugated fin design with aluminum, processed through advanced mechanical expansion tube technology. It maximizes adaptability to various harsh dust environments while ensuring heat exchange performance and efficiency, minimizing maintenance and cleaning, and extending service life.

Microcomputer Control

Microcomputer with user-friendly control, LCD large display screen, equipped with RS-485 communication interface, offering ventilation/refrigeration/heating triple operational modes, featuring scheduled on/off function, power failure memory function, real-time clock display, etc.; optimized control logic, meticulously designed operation data and full-code fault alarm query/prompt function, convenient and practical; the unit is equipped with various protection functions to ensure safe and worry-free operation.

Maintenance and repair

Convenient, straightforward, and functional frame-style structure design, fully considering the needs for flexible installation and maintenance, making installation and repair extremely easy. Includes a double-layer initial efficiency filter with washable features, offering a long service life.

Meet customers' special requirements

Based on customer requirements, we can add units with year-round refrigeration operation, high airflow with low enthalpy difference, corrosion-resistant coating, long-connection pipelines, fresh air supply, cool storage, remote control, steam heating, and hot water heating, etc.

Should there be any special requirements, parameters such as the aircraft size may vary. Customers must communicate these before placing an order and note the special requirements in the order.