详情描述

Product Specifications

Brand: YingTeng

Product Model: BCF-7JW

Control Range (Temperature): 18-35℃ ±1℃

Control Accuracy (Humidity): 40%-70% ±5%

Cooling Capacity: 7.5 kW

Heating Power: 5 kW

Dehumidification Capacity: 7kg/h

Airflow Rate: 2000 m³/h

Internal unit power supply: 380V/50Hz

Control System: 7-inch Touchscreen Intelligent Control System

Fan Power (Indoor): 0.2 kW

External Machine Power: 3.4 kW

Interior Unit Dimensions: 700×550×1800mm

Indoor Unit Weight: 85kg

Tubing: 12.7mm / 15.88mm

Blow Type: Side Blower/Top Blower

Exterior dimensions (side exhaust): 770×420×1210mm; (top exhaust): 710×710×830mm

Outboard Weight: 60kg

Outboard Power Supply: 380V/50Hz

Quantity of External Machine: 1

Ex db ib mb ll BT 4 Gb/Ex db ib mb ll CT 4 Gb

Manufacturer: Henan Tongteng Explosion-Proof Electrical Equipment Co., Ltd.

Note:

1. The above technical specifications are for reference only. Any changes are not subject to prior notice; the physical unit shall prevail!

2. Customizable - with optional R485 remote control interface; available for customization as requested.

The Yingteng series explosion-proof dehumidifiers comply with the following standards:

GB3836.1-2021 *1st Part: General Requirements for Electrical Equipment for Explosive Gas Atmospheres

GB3836.2-2021 *2nd Part: Electrical Equipment for Explosive Gas Atmospheres - Flameproof "d" Type

GB3836.4-2021 *2 Part: Intrinsically Safe "i" electrical equipment for explosive gas atmospheres

GB3836.9-2021 *9 Part: Encapsulation Type "m" Electrical Equipment for Explosive Gas Atmospheres

GB3836.15-2017 Electrical equipment for explosive gas atmosphere*Part 15: Electrical installation in hazardous areas (excluding coal mines) JB/T10538-2005 Explosion-proof Dehumidifiers and Air Conditioners

The YingTeng explosion-proof dehumidifier operates normally under the following environmental conditions:

a) Altitude not exceeding 2,000m;

b) Suitable for environments with temperatures ranging from 5°C to 38°C, and free of corrosive gases.

c) IA, IIB, IIC classifications; explosive hazard areas formed by mixtures of flammable gases, vapors, and air in T1 to T4 groups.

The "Yingteng" explosion-proof dehumidifier series has been specially processed with explosion-proof technology, making it suitable for 1 and 2 risk zones prone to flammable and explosive environments. It is widely used in scientific research, oil, chemical, pharmaceutical, and power plant settings where IIA, IIB, T1-T4 groups of combustible gases and steam-air mixtures may form explosive hazards. Yingteng explosion-proof dehumidifiers are ideal for areas with temperature requirements. These dehumidifiers have been inspected and certified by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center with explosion-proof certificates and CCC explosion-proof certificates. They feature an aesthetically pleasing design, reasonable structure, and easy installation and maintenance. The full range of explosion-proof dehumidifiers are equipped with branded compressors, microcomputer intelligent control, digital display, and offer low noise, stable performance, simple operation, and safety. They are highly favored by the market. (Customizable options include: mobile explosion-proof dehumidifiers, pipeline explosion-proof dehumidifiers, overhead explosion-proof dehumidifiers, temperature control explosion-proof dehumidifiers, cooling explosion-proof dehumidifiers, low-temperature explosion-proof dehumidifiers, high-temperature explosion-proof dehumidifiers, and corrosion-resistant explosion-proof dehumidifiers, etc.)

Yinteng Temperature-Controlled Explosion-Proof Dehumidifier Features

LCD Display: Equipped with a sleek and stylish LCD display.

Compressors: Utilize brand-name compressors, featuring low noise and reliable operation.

Automatic Defrosting: Compressor 3-minute delay protection, automatic defrost

Safety: Low-voltage control for enhanced safety;

Mobility: Equipped with swivel casters at the base for easy movement.

Drainage Method: Continuous drainage through hose.

Energy-saving, time-saving, and highly efficient energy conservation

Control Method: Microcomputer full automatic control, timed on/off.

Humidity can be set as required, automatically shuts off upon reaching the set level, and activates dehumidification when exceeding the limit.

Powerful dehumidification, essential for large warehouses, large workshops, underground garages, and similar locations.

YingTeng Temperature-Controlled Explosion-Proof Dehumidifier Working Principle:

When ambient air passes over the evaporator surface, due to the evaporator's temperature being lower than the dew point of the air, the moisture vapor in the air condenses in the water collection tray and is drained out through pipes. This reduces the air's humidity content, and the indoor environment can be heated, cooled, and dehumidified according to the user's requirements for temperature and humidity in the operating environment.

The temperature control explosion-proof dehumidifier combines refrigeration and dehumidification into one unit, mainly consisting of: the refrigeration section, the preliminary filtration section, and the circulating fan section. It features an upward air supply and a front-side downward return air design. By using microcomputer programming, it ensures the effective operation of each section, meeting the requirements for temperature and humidity control in the operating environment.

YingTeng Temperature-Controlled Explosion-Proof DehumidifierApplication Fields:

Aerospace & Aviation: Used for satellite and spacecraft assembly and testing sites, controlling air humidity and temperature.

Pharmaceutical Industry: With the implementation of GMP certification, the temperature and humidity requirements for pharmaceutical production have become increasingly significant. Yinteng's cooling and explosion-proof dehumidification units can create an excellent environment for pharmaceutical production to ensure drug quality.

Electronics Industry: Low humidity requirements for precision equipment manufacturing, including electronic components, aerospace devices, and lithium batteries.

Food Industry: Temperature control, explosion-proof, and dehumidifying machines can be equipped with sterilization functions, particularly suitable for process applications requiring constant temperature and dry air for sensitive food production lines, such as milk powder, freeze-dried vegetables, animal glue, and sugar.

Warehouse, library, archive: Stored items, books, documents, etc. can be preserved in a temperature and humidity environment for long-term preservation without damage.

Automotive Industry: The temperature control, explosion-proof, and dehumidification unit is an indispensable air treatment equipment in the production of automotive parts in the automotive industry.