详情描述

Product Specifications

Model: YT-9138E(GD)

Brand: YingTeng

Dehumidification Capacity (Operating Conditions: 90%RH at 30℃): 138L/D

Power Supply: 220V/50Hz

Input Power: 1330W

Defrosting Method: Automatic Defrost

Recirculating Airflow: 1000 m³/h

Drainage method: Hose drainage

Airflow Method: Front blowing, rear intake

Operating Environment Temperature: 5-38°C

Weight: 45 kg

Dimensions: Length 900mm, Width 585mm, Height 397mm


Note: Customized explosion-proof models are available. The above technical specifications are subject to change without prior notice; please refer to the actual machine for the most accurate information!

Automatic humidity control dehumidifiers with adjustable settings from 10%-90%, no need for dedicated personnel to monitor, simply set and it operates automatically (the dehumidifier turns on to remove moisture when humidity is too high; it goes into standby when humidity reaches the set point), achieving user-friendly, fully automatic control with high efficiency and energy saving.

The machine's humidity control switch can be isolated and placed at any convenient location for users to control and observe in real-time.

Multiple Protections: The unit is equipped with protections for overload, short circuit, phase loss, overheat, high voltage, low voltage, etc.

Machine features automatic fault detection; if a fault occurs, the machine will automatically identify the cause and display the corresponding fault code for easy repair.

Utilizing internationally renowned brand compressors, offering powerful performance and effective dehumidification.

Designs automatic defrost function, the dehumidifier will frost when the temperature drops below 18°C. To ensure better operation, an automatic defrosting sensor has been added to ensure normal use at low temperatures.

Ceiling Dehumidifier Principle

Based on standard dehumidifiers, we enhance the configuration, adjusting and increasing air volume and pressure. The intake and exhaust are connected using flanges and ducts, drawing moist indoor air into the machine through the site's piping for processing. The dried air is then returned to the room, thus cycling to achieve dehumidification.