- AllProduct Category
-
Explosion-proof Electric/Steam/Hot Water Heater Blowers
Humidifier and Dehumidifier in One
Rotary Dehumidification Unit - Customized
Mobile Air Conditioner/Portable Air Cooler
Fan Coil Unit/Air Handling Unit
Smart Dehumidifier Unit
Explosion-proof Modular Air Handling Unit / Swimming Pool Dehumidifying Air Handling Unit
Explosion-Proof Rooftop AC Series
Explosion-Proof Cold Water (Hot Water) Unit Series
Explosion-Proof Oven
Explosion-proof Air curtain Machine
Explosion-proof Temperature and Humidity Control Unit/Non-standard Temperature and Humidity Control System
Industrial Air Conditioning / Explosion-proof Industrial Air Conditioning
Cabinet Air Conditioners / Explosion-Proof Cabinet Air Conditioners
Explosion-proof Fan Coil Unit
Explosion-Proof Refrigerator
Explosion-proof Air Conditioner
Explosion-Proof Dehumidifier
Humidifier/Blast-Proof Humidifier
Dehumidifier


详情描述
YingTeng Explosion-proof Embedded Ceiling Fan Coil
Model: BFP51(KC)
Brand: YingTeng
Airflow (m³): 510
Cooling Capacity (W): 2700
Heat Output (W): 4050
Noise level dB(A): ≤39
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
Inlet and outlet pipes: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 680 x 680 x 390
Explosion-proof marking: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the actual product is to be taken as the standard.
Supply Cold Condition Parameters: Inlet Dry Bulb Temperature DB=27℃, Wet Bulb Temperature WB=19.5℃.
Cold water inlet temperature: 7℃, outlet temperature: 12℃。
Heating operating parameters: Imported air dry bulb temperature DB=21℃, incoming water temperature 60℃.
2. Noise Measurement: Values measured at 1 meter in front and above the equipment in an anechoic chamber.
YintengEmbedded explosion-proof fan coil unitThe explosion-proof marking is Ex db IIB T4 Gb.
YingTengEmbedded explosion-proof fan coilThe series products comply with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres – Part 2: Equipment protected by intrinsic safety 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9-2021 "Explosive Atmospheres - Part 9: Equipment protected by a "m" type of enclosure"
GB/T 3836.15-2017 "Explosive Atmospheres Part 15: Design, Selection, and Installation of Electrical Equipment"
YingTengEmbedded explosion-proof fan coilOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air, with II A, II B classes, and T1 to T4 groups.
YingTengEmbedded explosion-proof ceiling fan coilProduct Features
The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted options.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor to adjust air volume, meets various usage requirements.
The complete unit is made of hot-dip galvanized steel plate, copper tubes, and aluminum fins, offering strong rust resistance.
The water collection pan is fully molded, and the insulation is achieved through a complete pressure bonding process, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The condenser is made by mechanical tubing with copper tubes and high-efficiency aluminum fins.
YingTengEmbedded explosion-proof fan coilThe unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precise design allows for the left and right configurations to be ordered at will. If required by the customer, an automatic temperature control unit can be custom-made to maintain constant temperature in the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat-treated and chrome-plated for durability, with easy disassembly at the fixed points. The motor leads are protected by metal hoses, meeting international standards.
Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water pan and insulation are molded, with an overall adhesive bonding process, ensuring solid durability without any weld marks. The appearance is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe is made of sheet metal produced by Baosteel Shanghai, which is coated with plastic. The concealed pipe is made of galvanized steel or fingerprint-resistant steel.
The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and low air resistance.
The "Yingteng" explosion-proof ceiling fan coil series has been processed with special explosion-proof technology, suitable for widespread use in Class 1 and Class 2 flammable and explosive environments. It is ideal for scientific research, oil, power plants, and other locations where there may be or could be II A, II B, T1 to T4 groups of combustible gases, steam, and air mixtures posing explosion hazards. Wall-mounted explosion-proof ceiling fans are suitable for areas with temperature requirements. The Yingteng wall-mounted explosion-proof ceiling fan has been inspected and certified by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Product Quality, and issued with explosion-proof certificates and CCC certificates. It boasts an aesthetically pleasing design, reasonable structure, ease of installation and maintenance. The entire series features renowned compressors, microcomputer intelligent control, digital display, low noise, stable performance, simple operation, and safety. These advantages have made it highly favored in the market. (Customizable options include horizontal concealed explosion-proof ceiling fans, horizontal exposed explosion-proof ceiling fans, cabinet-style explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, embedded explosion-proof ceiling fans, and vertical exposed explosion-proof ceiling fans, etc.)












