详情描述

Yiting Fixed-Bracket Explosion-Proof Ceiling Fan Coil

Model: BFP51(LM)

Brand: YingTeng

Airflow (m³): 510

Cooling Capacity (W): 2700

Heat (W): 4050

Noise db(A): ≤39

Cold water supply temperature: 7℃-12℃

Hot Water Supply Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power: 220V/50Hz

In and Out Water Pipes: ZG 3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 880 x 260 x 640

Explosion-proof marking: Ex db IIB T4 Gb

Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.


Note: The above technical specifications are for reference only, and the actual product should be used as the standard.

1. Cooling supply parameters: Dry Bulb Temperature (DB) = 27°C, Wet Bulb Temperature (WB) = 19.5°C.

Cold water inlet temperature: 7℃, outlet temperature: 12℃.

Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.

2. Noise Measurement: Values measured at 1 meter in front of and above the equipment in an anechoic chamber.

YintengEmbedded explosion-proof fan coilThe explosion-proof marking is Ex db IIB T4 Gb.

YingTengEmbedded explosion-proof fan coilThe series products comply with the following standards:

GB/T 3836.1-2021 "Explosive Atmospheres Part 1: Equipment General Requirements"

GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 "d""

GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9-2021 "Explosive Atmospheres - Part 9: Equipment protected by a "m" type of enclosure"

GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"

YingTengEmbedded explosion-proof ceiling fan coilOperates normally under the following environmental conditions:

a) Altitude not exceeding 2,000m.

b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free from corrosive gases.

c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Group II A, II B, and T1 to T4 categories.

YingTengEmbedded explosion-proof ceiling fan coilProduct Features

The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.

Low overall height, saving building space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, meets various usage requirements.

The complete unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.

The drip pan is fully molded, and the insulation uses an integral pressure bonding process, eliminating concerns about condensation.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.

The heat exchanger is made of copper tubes and high-efficiency aluminum fins, mechanically expanded.

YintengEmbedded explosion-proof ceiling fan coilThe unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

精密 design allows for the selection of either left or right hand coils for ordering. If required by the customer, an automatic temperature control unit can be optionally provided for maintaining a constant temperature in the controlled area; (temperature control unit to be ordered separately)

The motor is an energy-saving fixed-phase capacitor motor, featuring imported high-precision steel ball bearings with automatic lubrication. The motor shafts are all heat treated and chrome-plated for durability and ease of disassembly at the fixed points. The motor leads are all protected with metal flexible hoses, conforming to international standards.

Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.

The water pan and insulation are made by molding, with an overall adhesive process, ensuring durability and no weld marks, with an aesthetically pleasing and lightweight design, no condensation or dripping; the exposed piping uses sheets produced by Baosteel Shanghai, with a spray-painted finish, while the concealed piping is made of galvanized steel or fingerprint-resistant steel.

Coiled tubing material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The body of the coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering extremely high thermal conductivity and low air resistance.

The "YingTeng" explosion-proof fan coil series models have been specially processed with explosion-proof technology, making them suitable for widespread use in flammable and explosive areas in Zones 1 and 2. They are ideal for research institutions, oil refineries, power plants, and other locations where IIA, IIB class T1 to T4 combustible gases, steam, and air mixtures pose an explosion hazard. Wall-mounted explosion-proof fan coils are suitable for areas with temperature requirements. The YingTeng wall-mounted explosion-proof fan coils have passed inspections by the National Supervision and Inspection Center for Explosion-Proof Electrical Product Quality and been awarded explosion-proof certificates and CCC explosion-proof certificates. They feature attractive design, reasonable engineering, and easy installation and maintenance. The full range of wall-mounted explosion-proof fan coils are equipped with brand-name compressors, microcomputer intelligent control, digital display, low noise, stable performance, simple operation, and high safety and reliability, making them popular in the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, embedded explosion-proof fan coils, vertical exposed explosion-proof fan coils, and more.)