详情描述

YingTeng Wall-Mounted Explosion-Proof Ceiling Fan Coil

Model: FP136(BG)

Brand: YingTeng

Airflow (m³): 1360

Cooling Capacity (W): 7200

Heat Output (W): 10800

Noise db(A): ≤46

Cold water supply temperature: 7℃-12℃

Hot Water Supply Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30 Pa/50 Pa

Power: 220V/50Hz

In-and-out water pipes: ZG3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 1080 x 330 x 220

Ex db IIB T4 Gb

Manufacturer: Henan Tongteng Explosion-proof Electrical Equipment Co., Ltd.

Note: The above technical specifications are for reference only; the physical unit is the standard.

1. Cooling supply conditions: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.

Cold water inlet temperature: 7°C, outlet temperature: 12°C.

Heating operating parameters:进口 air dry bulb temperature DB=21℃, incoming water temperature 60℃。

2. Noise Measurement: Values measured at 1-meter intervals in front and above the equipment in an anechoic chamber.

YingTeng wall-mounted explosion-proof fan coil has the explosion-proof mark Ex db IIB T4 Gb.

This product series adheres to the following standards:

GB/T 3836.1 - 2021 "Explosive Atmospheres - Part 1: Equipment - General Requirements"

GB/T 3836.2-2021 "Explosive Atmospheres *Part 2: Equipment protected by intrinsic safety 'd'"

GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"

GB/T 3836.15-2017 "Explosive Atmospheres - Part 15: Design, Selection, and Installation of Electrical Equipment"

Wall-mounted explosion-proof fan coil units can operate normally under the following environmental conditions:

a) Altitude not exceeding 2,000m.

b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.

c) There are explosion hazard areas formed by mixtures of flammable gases, vapors, and air in Groups II A, II B, and T1 to T4.

Wall-mounted explosion-proof fan coilProduct Features

The Yingteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted options.

Low overall height, saving architectural space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.

The entire unit is made of hot-dipped galvanized sheet, copper tubes, and aluminum fins, offering strong rust resistance.

The drip pan is formed in one piece through vacuum forming, and heat insulation is achieved using a full-pressure bonding process, eliminating concerns about condensation.

Equipped with exhaust and draining functions, ensuring adequate heat exchange and preventing pipeline cracking from freezing.

The condenser is made by mechanical bending of copper tubes and high-efficiency aluminum fins.

The unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

精密 design allows for the selection of left or right-handed coils for ordering. If required by the user, an automatic temperature control unit can be custom-made to maintain a constant temperature in the controlled area; (Temperature control unit to be ordered separately)

The motor is a energy-saving fixed phase capacitor motor, with imported high-precision steel ball bearings that can be self-lubricated. The motor shafts are all tempered and treated with hard chrome, ensuring long-lasting durability and easy disassembly at the fixed points. The motor lead wires are all protected by metal hoses, conforming to international standards.

Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.

The water tray and insulation are molded, with an overall adhesive bonding process, ensuring strength, durability, and no welding marks. The appearance is beautiful and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Baosteel Shanghai, which are spray-painted for the surface finish, while the concealed piping is made from galvanized steel or fingerprint-resistant steel.

The coiled material is made of seamless copper tubes with corrugated aluminum fins, formed through hydraulic or mechanical expansion. The coil housing is lined with sound-absorbing and insulating materials, featuring copper tubes in an interlaced arrangement, providing exceptional heat transfer performance and low air resistance.

The "Yingteng" wall-mounted explosion-proof fan coil series models have been processed with special explosion-proof technology, making them suitable for 1st and 2nd zone flammable and explosive environments. They are widely used in scientific research, oil, chemical, and power plant settings where II A, IIB, T1-T4 groups of combustible gases, steam, and air mixtures may pose explosion hazards. Wall-mounted explosion-proof fan coils are ideal for spaces with temperature requirements. The Yingteng wall-mounted explosion-proof fan coils have passed inspections by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center, receiving explosion-proof certification and CCC certification. They feature an attractive appearance, reasonable design, and ease of installation and maintenance. The entire series incorporates brand-name compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and safety. These products are highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, embedded explosion-proof fan coils, vertical exposed explosion-proof fan coils, etc.).