详情描述

Yiting Horizontal Ceiling Mount Explosion-Proof Ceiling Fan Coil

Product Specifications

Model: BFP238(WM)

Brand: YingTeng

Airflow (m³): 2380

Cooling Capacity (W): 12,600

Heat (W): 18900

Noise db(A): ≤52

Cold Water Supply Temperature: 7℃-12℃

Supplying Hot Water Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30 Pa/50 Pa

Power Supply: 220V/50Hz

In and Out Pipe: ZG3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 1980 x 500 x 250

Ex db IIB T4 Gb

Manufacturer: Henan Tongteng Explosion-Proof Electrical Equipment Co., Ltd.

Note: The above technical specifications are for reference only, and the actual product should be used as the standard.

1. Supply cooling conditions parameters: Inlet dry bulb temperature DB = 27℃, wet bulb temperature WB = 19.5℃.

Cold water inlet temperature: 7°C, outlet temperature: 12°C.

Heating operating parameters: Inlet air dry bulb temperature DB=21°C, incoming water temperature 60°C.

2. Noise Measurement: Values measured at 1 meter forward and 1 meter above/below the equipment in an anechoic chamber.

YingTeng explosion-proof ceiling fan coil has the explosion-proof mark of Ex db IIB T4 Gb.

YingTeng explosion-proof fan coil unit series products comply with the following standards:

GB/T 3836.1 - 2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"

GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"

GB/T 3836.4 - 2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9 - 2021 "Explosive Atmospheres - Part 9: Equipment protected by encased "m""

GB/T 3836.15-2017 "Explosive Atmospheres Part 15: Design, Selection, and Installation of Electrical Equipment"

The Yinteng explosion-proof fan coil can operate normally under the following environmental conditions:

a) Altitude not exceeding 2,000m;

b) Suitable for environments with temperatures ranging from -7°C to 43°C, free of corrosive gases.

c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.

YingTeng Explosion-proof Ceiling Fan Coil Product Features

The YingTeng explosion-proof ceiling fan coil series includes: horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-hung models.

Low overall height, saving architectural space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.

The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong corrosion resistance.

The water pan is formed through a whole molding process, and heat preservation is achieved with an integral pressure bonding technique, eliminating concerns about condensation water.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.

The evaporator is made of copper tubes and high-efficiency aluminum fins, mechanically drawn.

Yiting explosion-proof fan coil units feature an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

精密 design allows for optional left or right coil ordering. An automatic temperature control unit can be custom-fitted upon request for constant temperature control of the controlled area; (temperature control unit to be ordered separately)

The motor is an energy-saving fixed-phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are heat-treated and coated with hard chrome for durability, with ease of disassembly and assembly at the fixed points. The motor leads are protected with metal hoses, complying with international standards.

Standard coil discharge outlet static pressure is 0~12Pa, while the pressure retaining discharge outlet static pressure is 30Pa (or ≤50Pa), with the code H.

The water pan and insulation are molded, with an overall adhesive process, ensuring strength and durability without any weld marks. The exterior is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe fittings use sheets produced by Shanghai Baogang, which are spray-painted, while the concealed pipe fittings are made of galvanized steel or fingerprint-resistant steel.

The coiled tubing is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The interior of the coil casing is lined with sound-absorbing and insulating material. The copper tubes are arranged in an interlaced pattern, offering exceptional heat transfer performance and low air resistance.

The "Yingteng" explosion-proof ceiling fan coil series has been processed with special explosion-proof technology and is suitable for 1st and 2nd zone flammable and explosive environments. It is widely used in scientific research, oil, power plants, and other places where there may be or could be II A, II B, T1-T4 groups of combustible gases, steam, and air mixtures forming explosive hazards. Yingteng explosion-proof ceiling fans are suitable for areas with temperature requirements. Yingteng explosion-proof ceiling fans have been inspected and certified by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products, receiving both explosion-proof certificates and explosion-proof CCC certificates. They feature an aesthetically pleasing design, reasonable structure, and ease of installation and maintenance. The full series uses brand-name compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and reliable safety, making them highly favored in the market. (Customizable options include horizontal concealed explosion-proof ceiling fans, horizontal exposed explosion-proof ceiling fans, cabinet-style explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, embedded explosion-proof ceiling fans, and vertical exposed explosion-proof ceiling fans, etc.).