详情描述

Yinteng Wall-Mounted Explosion-Proof Ceiling Fan Coil

Model: BFP204(LG)

Brand: YingTeng

Airflow (m³): 2040

Cooling Capacity (W): 10,800

Heat (W): 16,200

Noise db(A): ≤50

Cold water supply temperature: 7℃-12℃

Supplying Hot Water Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power: 220V/50Hz

In and Out Pipe: ZG3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 600 x 355 x 1910

Ex db IIB T4 Gb

Manufacturer: Henan Tongteng Explosion-Proof Electrical Appliances Co., Ltd.

Note: The above technical specifications are for reference only, and the actual product should be used as the standard.

1. Cooling supply conditions parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.

Inlet water temperature for cold water: 7℃, outlet water temperature: 12℃.

Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.

2. Noise Measurement: Values measured at 1 meter in front of and above the equipment, in an anechoic chamber.

The Yinteng wall-mounted explosion-proof fan coil has the explosion-proof mark of Ex db IIB T4 Gb.

The Yinteng wall-mounted explosion-proof fan coil series products comply with the following standards:

GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"

GB/T 3836.2-2021 "Explosive Atmospheres – Part 2: Equipment protected by explosion-proof enclosures 'd'"

GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9 - 2021 "Explosive Atmospheres - Part 9: Equipment protected by encapsulated "m" type"

GB/T 3836.15-2017 "Explosive Atmospheres - Part 15: Design, Selection, and Installation of Electrical Equipment"

The Yingteng Wall-Mounted Explosion-Proof Ceiling Fan Coil Unit can operate normally under the following environmental conditions:

a) Altitude not exceeding 2,000m

b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.

c) There are hazardous areas where flammable gases, vapors, and air mixtures from Groups II A, II B, and T1 to T4 can cause explosions.

YingTeng Wall-Mounted Explosion-Proof Ceiling Fan Coil Product Features

The YingTeng explosion-proof fan coil units include horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-mounted, wall-hung, and other series.

Low overall height, saving building space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable airflow, meets various application requirements.

The entire unit is made of hot-dipped galvanized sheet, copper pipes, and aluminum fins, offering strong corrosion resistance.

The drip pan is fully molded, and the insulation is applied using a whole-pressure bonding technique, eliminating concerns about condensation.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.

The cooler uses copper pipes and high-efficiency aluminum fins, mechanically expanded.

The Yingteng wall-mounted explosion-proof fan coil unit features an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

Precise design allows for the selection of either left or right-hand coil ordering. An automatic temperature control unit can be custom-made upon request for constant temperature control at the controlled location; (temperature control unit to be ordered separately)

The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision ball bearings that can be self-lubricated. The motor shafts are all tempered and treated with hard chrome, ensuring long-lasting durability and easy disassembly at fixed points. The motor leads are all protected by metal hoses, conforming to international standards.

The static pressure at the ordinary coiled outlet is 0~12Pa, while the static pressure at the residual pressure outlet is 30Pa (or ≤50Pa), with the code H.

The water tray and insulation are molded, with an overall adhesive bonding process, ensuring strength, durability, and seamless construction. The appearance is beautiful and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Shanghai Baosteel, which are coated with plastic. The concealed piping is made from galvanized steel or fingerprint-resistant steel plates.

The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The body of the coil box is lined with sound-absorbing and insulating materials, with copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and minimal air resistance.

The "Yingteng" explosion-proof fan coil series models have been specially processed with explosion-proof technology, making them suitable for widespread use in Class 1 and 2 flammable and explosive environments. They are ideal for research institutions, oil refineries, power plants, and other locations where IIA, IIB Group T1 to T4 combustible gases, steam, and air mixtures pose an explosion hazard. The Yingteng wall-mounted explosion-proof fan coil is suitable for areas with temperature requirements. It has passed inspection by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center, receiving both explosion-proof certification and CCC certification. The coil boasts an aesthetically pleasing design, reasonable construction, and ease of installation and maintenance. The entire series of wall-mounted explosion-proof fan coils feature renowned compressors, microcomputer intelligent control, digital display, low noise, stable performance, simple operation, and high safety reliability, making them highly favored by the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, embedded explosion-proof fan coils, and vertical exposed explosion-proof fan coils, etc.).