详情描述

Yingteng Horizontal Concealed Explosion-Proof Ceiling Fan Coil

Product Specifications

Model: BFP136(WA)

Brand: YingTeng

Airflow (m³): 1360

Cooling Capacity (W): 7200

Heat (W): 10800

Noise db(A): ≤46

Cold Water Supply Temperature: 7℃-12℃

Hot Water Supply Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power Supply: 220V/50Hz

Inlet and outlet pipes: ZG3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 1340*475*246

Explosion-proof marking: Ex db IIB T4 Gb

Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.

Note: The above technical specifications are for reference only; the physical unit is the standard.

1. Supply cold condition parameters: inlet dry bulb temperature DB = 27℃, wet bulb temperature WB = 19.5℃.

Inlet water temperature: 7℃, outlet water temperature: 12℃.

Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.

2. Noise Measurement: Values measured at 1-meter distances above and below the front of the unit in an anechoic chamber.

The Yingteng explosion-proof ceiling fan coil has the explosion-proof mark of Ex db IIB T4 Gb.

The Yingteng explosion-proof ceiling fan coil series products comply with the following standards:

GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment - General Requirements"

GB/T 3836.2-2021 "Explosive atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"

GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"

GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"

The Yinteng explosion-proof fan coil can operate normally under the following environmental conditions:

a) Altitude not exceeding 2,000m.

b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free from corrosive gases.

c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air in II-A, II-B, T1 to T4 groups.

Yinteng Explosion-Proof Ceiling Fan Coil Product Features

The Yinteng explosion-proof fan coil units come in various series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.

Low overall height, saving construction space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, meets various application requirements.

The entire unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong corrosion resistance.

The water tray is fully molded, and the insulation is applied using a full-pressure bonding technique, eliminating concerns about condensation.

Equipped with exhaust and draining functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.

The condenser is made by mechanical bending of copper tubes and high-efficiency aluminum fins.

The Yingteng explosion-proof fan coil unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

Precise design allows for the left and right styles of coils to be ordered at will. Upon customer request, an automatic temperature control unit can be customized for constant temperature control of the controlled space; (temperature control unit to be ordered separately)

The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat-treated and treated with hard chrome for durability, with easy disassembly at the fixed points. The motor leads are all protected by metal hoses, meeting international standards.

The static pressure at the common coiled duct outlet is 0~12Pa, while the static pressure at the pressure drop-type outlet is 30Pa (or ≤50Pa), with the code H.

The water tray and insulation are molded, with an overall adhesive bonding process, ensuring durability without weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe is made from sheet metal produced by Baosteel Shanghai, which is surface coated. The concealed pipe is made from galvanized steel or fingerprint-resistant steel.

The coil material is made from seamless copper tubes with corrugated aluminum fins, formed through hydraulic or mechanical expansion. The coil casing is lined with sound-absorbing insulation material, featuring copper tubes arranged in an interlaced pattern, which boasts exceptional heat transfer performance and low air resistance.

The "YingTeng" explosion-proof fan coil series models have been processed with special explosion-proof technology, making them suitable for widespread use in Class 1 and 2 flammable and explosive environments. They are ideal for research, oil, power plants, and other locations where II A, IIB, T1 to T4 groups of combustible gases, steam, and air mixtures pose explosion hazards. YingTeng explosion-proof fan coils are suitable for areas with temperature requirements. These coils have been inspected and certified by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products, receiving both explosion-proof certificates and CCC certificates. They feature an aesthetically pleasing design, reasonable structure, and easy installation and maintenance. The full series utilizes branded compressors, microcomputer intelligent control, digital display, and offers low noise, stable performance, simple operation, and reliable safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, embedded explosion-proof fan coils, and vertical exposed explosion-proof fan coils, etc.).