详情描述

YingTeng Horizontal Surface-Mounted Explosion-Proof Ceiling Fan Coil

Product Specifications

Model: BFP34(WM)

Brand: Yingten

Airflow (m³): 340

Cooling Capacity (W): 1800

Heat (W): 2700

Noise dB(A): ≤37

Cold Water Supply Temperature: 7℃-12℃

Hot Water Supply Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power: 220V/50Hz

In and Out Pipe: ZG3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 750 x 500 x 250

Explosion-proof marking: Ex db IIB T4 Gb

Manufacturer: Henan Tongteng Explosion-proof Electrical Appliances Co., Ltd.

Note: The above technical specifications are for reference only, and the actual product should be used as the standard.

1. Cooling supply conditions: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.

Cold water inlet temperature: 7℃, outlet temperature: 12℃.

Heating operating parameters: Imported air dry bulb temperature DB=21°C, incoming water temperature 60°C.

2. Noise Measurement: Values measured at 1 meter above and below the front of the unit, within an anechoic chamber.

The Yingteng explosion-proof ceiling fan coil has the explosion-proof mark of Ex db IIB T4 Gb.

The Yinteng explosion-proof ceiling fan coil series products comply with the following standards:

GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"

GB/T 3836.2-2021 "Explosive Atmospheres *Part 2: Equipment protected by隔爆外壳 'd'"

GB/T 3836.4 - 2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9 - 2021 "Explosive Atmospheres - Part 9: Equipment protected by a "m" type of enclosure"

GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"

The YingTeng explosion-proof fan coil operates normally under the following environmental conditions:

a) Altitude not exceeding 2000m.

b) Applicable environmental conditions: Temperature -7°C to 43°C, free of corrosive gases.

c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Group II A, II B, T1 to T4 categories.

YingTeng Explosion-Proof Ceiling Fan Coil Unit Product Features

The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.

Low overall height, saving space in construction.

High cooling (heating) capacity, low noise, three-speed motor for variable air volume, catering to different usage requirements.

The complete unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.

The overall die-cast drip pan, with overall pressure bonding technology for insulation, ensures no condensation water issues.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.

The cooler is made of copper tubes and high-efficiency aluminum fins, processed through mechanical bending.

YingTeng explosion-proof ceiling fan coil units utilize high-efficiency aluminum fin heat exchangers with low-noise fans, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

Precise design allows for the left and right configurations of coils to be selected as per order. If required by the customer, an automatic temperature control unit can be provided to maintain a constant temperature in the controlled space; (temperature control unit to be ordered separately)

The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all treated with quenching and hard chrome, ensuring durability and easy disassembly at fixed points. The motor leads are protected with metal flexible hoses, compliant with international standards.

The static pressure of the standard coiled discharge outlet is 0~12Pa, while the static pressure of the residual pressure discharge outlet is 30Pa (or ≤50Pa), with the code H.

The water tray and insulation are molded, with an overall adhesive process, ensuring durability without weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Baosteel Shanghai, surface treated with spray painting, while the concealed piping is made from galvanized steel or fingerprint-resistant steel.

The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil housing is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and extremely low air resistance.

The "YingTeng" explosion-proof fan coil series models have been processed with special explosion-proof technology, making them suitable for 1 and 2 area flammable and explosive environments. They are widely used in scientific research, oil, power plants, and other locations where IIa, Iib Group T1 to T4 combustible gases, steam, and air mixtures may pose explosion hazards. YingTeng explosion-proof fan coils are suitable for environments with temperature requirements. These coils have been inspected and certified by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center, with both explosion-proof and explosion-proof CCC certificates. They feature an aesthetically pleasing design, reasonable structure, ease of installation and maintenance. The entire series utilizes brand-name compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and reliable safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, embedded explosion-proof fan coils, and vertical exposed explosion-proof fan coils, etc.).