详情描述

YingTeng Horizontal Concealed Ceiling Fan Coil

Product Specifications

Model: BFP102(WA)

Brand: YingTeng

Airflow (m³): 1020

Cooling Capacity (W): 5400

Heat (W): 8100

Noise level dB(A): ≤45

Cool Water Supply Temperature: 7℃-12℃

Hot Water Supply Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power: 220V/50Hz

In-and-out water pipes: ZG3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 1440 x 475 x 246

Explosion-proof marking: Ex db IIB T4 Gb

Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.

Note: The above technical specifications are for reference only, please refer to the actual unit for accuracy.

1. Cooling supply conditions parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.

Cold water inlet temperature: 7℃, outlet temperature: 12℃.

Heating operating parameters: Imported air dry bulb temperature DB = 21℃, incoming water temperature 60℃.

2. Noise Measurement: Values measured at 1 meter above and below the front of the unit in an anechoic chamber.

The YingTeng explosion-proof ceiling fan coil has the explosion-proof mark Ex db IIB T4 Gb.

The Yiting Explosion-proof Ceiling Fan Coil Series complies with the following standards:

GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"

GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 "d""

GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9 - 2021 "Explosive Atmospheres - Part 9: Equipment protected by "m" type enclosures"

GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"

The YingTeng explosion-proof ceiling fan coil operates normally under the following environmental conditions:

a) Altitude not exceeding 2,000m;

b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.

c) There are explosive hazardous areas formed by the mixture of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.

Yinteng Explosion-Proof Ceiling Fan Coil Product Features

The Yingteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted options.

Low overall height, saving construction space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.

The complete unit is made of hot-dip galvanized steel, copper tubes, and aluminum fins, offering strong corrosion resistance.

The overall molded sink, with overall pressure bonding technology for insulation, eliminates the worry of condensation water.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.

The cooler is made of copper tubes and high-efficiency aluminum fins, mechanically expanded.

The Yiting explosion-proof fan coil units utilize high-efficiency aluminum fin-tube heat exchangers with low-noise fans, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

精密 design allows for the selection of either left or right-style coils for ordering. An automatic temperature control unit can be optionally provided for恒温 control of the controlled area; (temperature control unit to be ordered separately)

The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that can be self-lubricated. The motor shafts are all heat-treated and chrome-plated for durability, with easy disassembly at the fixed points. The motor leads are protected with metal hoses, meeting international standards.

Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.

The water pan and insulation are made using molding technology, featuring an overall adhesive bonding process for durability and strength without weld marks. The exterior is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe is made from plates produced by Shanghai Baosteel, which are coated with spray paint. The concealed pipe is made from galvanized steel or fingerprint-resistant steel plates.

Coiled materials are made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-insulating and thermal insulation materials, featuring a copper tube arrangement with minimal air resistance and excellent heat transfer properties.

The "Yingteng" explosion-proof fan coil series models have been specially processed with explosion-proof technology and are widely applicable in Class 1 and Class 2 flammable and explosive environments. They are suitable for research, oil, chemical, power plants, and other locations where there may be or could be II A, II B, T1 to T4 groups of combustible gases, steam, and air mixtures forming explosive hazards. Yingteng explosion-proof fan coils are suitable for areas with temperature requirements. They have been inspected and certified by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products, with explosion-proof certificates and CCC explosion-proof certificates. They feature an aesthetically pleasing design, reasonable structure, and easy installation and maintenance. The full series of explosion-proof fan coils use brand-name compressors, microcomputer intelligent control, digital display, and have the advantages of low noise, stable performance, simple operation, and safety. They are highly favored by the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, flush-mounted explosion-proof fan coils, and vertical exposed explosion-proof fan coils, etc.).