详情描述

YingTeng Horizontal Concealed Explosion-Proof Ceiling Fan Coil

Product Specifications

Model: BFP51(WA)

Brand: YingTeng

Airflow (m³): 510

Cooling Capacity (W): 2700

Heat Output (W): 4050

Noise dB(A): ≤39

Cold water supply temperature: 7℃-12℃

Hot Water Supply Temperature: 40℃-60℃

Working Pressure (KPa): 1.6

Static Pressure: 30Pa/50Pa

Power: 220V/50Hz

In-and-out piping: ZG 3/4

Condensate Drain Pipe: ZG3/4

Dimensions (Length x Width x Height mm): 840 x 475 x 246

Explosion-proof marking: Ex db IIB T4 Gb

Manufacturer: Henan Tongteng Explosion-Proof Electrical Equipment Co., Ltd.

Note: The above technical specifications are for reference only, and the actual unit should be taken as the standard.

1. Cooling supply parameters: Inlet dry bulb temperature DB=27℃, wet bulb temperature WB=19.5℃.

Cold water inlet temperature: 7℃, outlet temperature: 12℃.

Heating operating parameters: Imported dry bulb air temperature DB = 21°C, incoming water temperature 60°C.

2. Noise Measurement: Values measured at 1 meter above and below the front of the equipment, within an anechoic chamber.

YingTeng explosion-proof ceiling fan coil has the explosion-proof marking of Ex db IIB T4 Gb.

YingTeng explosion-proof ceiling fan coil series products are in compliance with the following standards:

GB/T 3836.1-2021 "Explosive Atmospheres Part 1: Equipment General Requirements"

GB/T 3836.2-2021 "Explosive Atmospheres *Part 2: Equipment protected by隔爆外壳 "d""

GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"

GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"

GB/T 3836.15-2017 "Explosive Atmospheres - Part 15: Design, Selection, and Installation of Electrical Equipment"

The YingTeng explosion-proof ceiling fan coil operates normally under the following environmental conditions:

a) Altitude not exceeding 2,000m

b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.

c) There are hazardous explosive areas formed by mixtures of flammable gases, vapors, and air, ranging from Class II A, II B, and Groups T1 to T4.

Inten Explosion-Proof Ceiling Fan Coil Product Features

The Yinteng explosion-proof fan coil units come in various series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.

Low overall height, saving building space.

High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.

The whole unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong corrosion resistance.

The drip pan is fully molded, and the insulation is applied using a full-pressure bonding technique, eliminating concerns about condensation.

Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.

The evaporator is made of copper tubes and high-efficiency aluminum fins, mechanically drawn to form.

The YingTeng explosion-proof air-cooled ceiling fan coil unit is equipped with an efficient aluminum finned heat exchanger and a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.

Precision design allows for the selection of either left or right-style coils for ordering. Upon request, an automatic temperature control unit can be provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)

The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat-treated and chrome-plated for durability, with easy disassembly at the fixed points. The motor leads are protected by metal hoses, compliant with international standards.

Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.

The water tray and insulation are molded, with an overall adhesive bonding process, ensuring durability without weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Baosteel Shanghai, surface treated with spray painting, while the concealed piping is made from galvanized steel or fingerprint-resistant steel plates.

The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed through hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, with the copper tubes arranged in an alternating pattern, boasting excellent heat transfer performance and minimal air resistance.

The "YingTeng" explosion-proof ceiling fan coil series has been specially processed with explosion-proof technology, making it suitable for widespread use in Class 1 and 2 flammable and explosive environments. It is ideal for research, oil, chemical, pharmaceutical, and power plant settings where IIA, IIB, T1-T4 groups of combustible gases, steam, and air mixtures may form explosive hazards. YingTeng explosion-proof ceiling fans are suitable for areas with temperature requirements. They have passed inspections by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center, receiving explosion-proof certification and CCC certification. They feature an aesthetically pleasing design, reasonable structure, and easy installation and maintenance. The entire series uses brand-name compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and high safety reliability, making them highly favored by the market. (Customizable options include horizontal concealed explosion-proof ceiling fans, horizontal exposed explosion-proof ceiling fans, cabinet-style explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, embedded explosion-proof ceiling fans, and vertical exposed explosion-proof ceiling fans, etc.).