What are the forward and backward tilting blades of high-temperature fans like?

High-temperature circulating fans are commonly referred to as high-temperature centrifugal induction fans. Due to the high temperatures of the media, these fans possess the characteristic of fan blades. They are made from high-temperature-resistant stainless steel or alloy steel. Today, we mainly introduce the blade design of high-temperature fans. High-temperature fans are typically used for conveying hot air. Different lengths, diameters, elbows, and numbers of machines in the pipeline cause varying resistances. To overcome different resistances along the way, fans require different wind pressures. The calculation of wind pressure in high-temperature fans has been mentioned, rather than the wind pressure itself. Different feathers are mainly divided into forward-sloping blades and rear-sloping blades. The feature of the forward-sloping blade is that the angle formed by the blade tip and the centerline of the feather carriage is sharp relative to the windward side. The feather carriage of the forward-sloping blade of high-temperature fans is generally for wind pressure, and the common housing appears relatively narrow. The characteristic of the rear-sloping blade is that the angle formed by the blade tip and the centerline of the feather carriage is钝 relative to the windward side. The rear-sloping blades usually have a higher air volume, with a relatively spacious housing. The choice of forward or rear blades is actually determined by the type of fan. High-temperature fans and low-pressure fans have distinct types. In certain error cases, such as the reversal of forward and rear sloping feather factors, it can cause some illusions. One is insufficient wind, and the other is motor overload. The reversal in both cases is incorrect. For more information on high-temperature fans, please feel free to follow us.