Fujian Chongwu Hotel Leisure Area Gravel Polymer Color Concrete Paving - Stone-like Flooring Decoration Construction Method

Gravel polymer flooring is often used in places like playgrounds and parks, where the desired effect is often achieved by laying down granite, marble, and other stone materials. However, generally speaking, stone sizes are standardized, and during installation, larger-radius turns usually require the stones to be cut into smaller pieces for assembly. This not only makes the process complicated and environmentally unfriendly but also leads to significant waste of stone during cutting. Moreover, the surface paved with stone has poor overall bearing capacity, with pieces that are prone to damage at the edges and corners.

A practical and strong-carrying capacity gravel polymer imitated stone flooring with integrated casting, which solves the issue of material waste and environmental pollution caused by stone cutting during the construction of existing stone road surfaces, while also improving the problems of easy damage and poor durability associated with stone laying.

Aggregate Polymer Flooring Features:

Durable and Strong: Wear-resistant, UV-resistant, strong adhesion, high durability of bonding material, and excellent resistance to falling off and washing away by rain.

Eco-Aesthetic: Made from natural pebbles, low-carbon and eco-friendly, the glassy stone is lustrous and brilliant, with a variety of colors to meet personalized pattern customization.

Easy maintenance: High-pressure water gun cleaning is convenient, and replacement and repair do not require machinery, offering ease and economy.

Anti-freeze and Anti-slip: High-intensity polymer enhanced adhesive, equal-fiber materials, with improved resistance to freeze-thaw, road surface granular texture, preventing pedestrians and vehicles from slipping, enhancing safety.

Gravel Polymer Construction Process

1. Paving: Add a certain proportion of colored dye to the concrete for mixing, clean the subgrade thoroughly, and lay it out wet, then smooth it.

2. Spread colorful gravel: The concrete surface is finely polished, followed by the application of polymer color reinforcing agents and polishing. When the fine concrete dries to 5-6 degrees, spread the gravel material and other stone materials, smooth with a trowel, compact with a grinder, and then spread the gravel material again.

3. Spray Passivation Agent: Apply a layer of passivation agent to the initial setting pavement surface and cover it with a film.

4. Rinse: After sufficient reaction, rinse the surface mortar with a high-pressure water jet based on the temperature and the setting of the cement, revealing the gravel aggregates.

5. Clean Impurities: Use *** acidic solution (0.3kg/m²) to wash the laid pavement, removing surface cement impurities.

6. Spray sealant after the road surface is completely dry.