Full-range construction of concrete artistic embossed pavement for Xuanzhou garden landscape architecture; free samples of flooring materials provided

Step-by-Step Installation Process for Decorative Concrete Pavers
Trowel finish treatment on concrete surface: Before the concrete surface starts to set, apply a 1cm layer of cement slurry, then use a hand trowel to evenly spread and level the mortar on the concrete surface, creating a textured finish.
2. Sprinkle hardening material: Evenly sprinkle 2/3 of the specified hardener on the concrete surface during the initial setting stage, using a hand iron board to level and smooth it after the hardening material absorbs moisture. Once the hardening material reaches a certain stage of initial setting, proceed with a second operation to sprinkle the remaining 1/3 material, leveling and smoothing it.
3. Leveling and Hardening Material: Perform at least three manual iron board leveling operations based on the concrete's hardening status, with the smoothing operations to be alternated.
4. Apply release agent: Once the hardening material has reached a certain initial setting stage and the surface is dry with no visible moisture, uniformly sprinkle a layer of release agent that is compatible with the hardening material.
5. Mold patterns, ensuring the mold remains flat and stationary. The pattern must be formed in a single press and should not be repressed.
6. Offer various design styles, textures, and colors, as well as interplay of multiple colors.