What are the wiring techniques for large-span cable bridge supports?

1. During installation on long-span cable bridge supports, cables can be laid without spacing. The transverse area fill rate of power cables within the bridge should be below 40%, while control cables should be less than half the cross-sectional area of the bridge.

2. When installing the cable bridge, it should not be placed above corrosive gas pipelines or steam pipelines. The cable bridge manufacturer also advises against directly installing the cable bridge below corrosive liquid pipelines. If such installation is necessary, proper protective and insulation measures should be taken.

3. If the installation location is corrosive or extremely humid, appropriate protective measures must be taken during wiring, based on the nature of the corrosive medium.

What are the wiring techniques for large span cable bridgeways?

4. When installing several cable trays at the same height simultaneously, consider the maintenance and inspection distances between each tray.

In addition to installing protective covers, it is also crucial to pay attention to the wiring process to ensure the cable tray operates at its full potential.

Above is the introduction of the wiring techniques for "large span cable bridge supports." Did you get the hang of it? Hope the above content is helpful to you after reading.