What are the operation precautions for the slitting machine that you should know about?

During operation, always keep an eye on whether all components are functioning properly and if there are any unusual sounds. If any occur, stop immediately and identify the cause to resolve it.

2. In ultrasonic welding and pre-startup manual mode, intermediate缝合 materials must be checked, and ensure the compiler controller is in automatic mode before initiating work.

3. Gradually increase speed while driving, keeping an eye on the blade. The distance should not be too wide, as it may have sharp edges, nor too close, as it may damage the blade.

4. When straightening the blades, when the top blade is 2-3mm away from the bottom blade, the top blade should be locked in place, aligned with the bottom blade slot, and then lowered to prevent the top blade from touching the bottom blade. When straightening the blades, the blade holder must be securely locked; if the top blade holder is loose, the blade cannot stick out during cutting.

5. Caution: The machine should be grounded prior to use to prevent electric shock.