This machine can produce non-standard, national standard nuts, flanges, lighter parts, electronic accessories, various semi-hollow rivets, full-hollow rivets, solid rivets, pull rivets, furniture screws, and stainless steel products. The machine uses parallel cutting and feeding. It is fully automatic, with one-time molding and automatic separation of finished products and waste materials. Our company also produces nut cold heading machines, double-headed screw machines, various rivet machines, cylinder pin cold heading machines, warm heading machines, red forging machines (automatic red forging machines): They utilize a full solid-state induction heater to heat the material, taking advantage of the machine's forging pressure for automatic feeding, heating, cutting, stamping, and dropping of materials. This allows for one-time molding of products in molds, capable of heading spherical, hexagonal, cylindrical, valve bodies, and other irregular parts. This process can reduce material requirements, lower costs, achieve one-time molding, reduce processes, and enable the heading of deep-hole and multi-hole parts, solving the difficult problem of complex parts, and continuous production to improve efficiency. This equipment is an ideal solution for cold heading processes that cannot be addressed, and it represents an upgrade and replacement for the press brake heating and red heading press process. Production Efficiency: 5 to 6 times that of a press brake, with a rate of 50 to 100 pieces per minute depending on the product. Operators: One person can operate, saving 5 workers compared to traditional press brakes. Safety: Fully automatic production, safe and reliable, with no work-related injuries. Production Costs: One 60-100 kW full solid-state induction heater, one main machine, saving 30% on electricity. Quality Rate: The product pass rate is 98%, while the press brake pass rate is 90%.