ADRS Type Standard Tape with Premium Dot Patch

During operation, tape conveyors may suffer damage to both sides due to misalignment or inherent quality issues with the conveyor itself, affecting normal usage. The DJQ type electric heating tape edge repairer,

Can effectively vulcanize-repair edge damage within a short downtime (usually 3 hours) without removing the roller, making it a versatile all-purpose repair unit.

Its performance and operation are identical to that of a vulcanizing machine.

Technical Specifications:

1. Sulfurizing Temperature: 145℃

2. Sulfur Pressure: 0.8 Mpa

3. Heating Plate Size: 700×350 (mm)

4. Rated Power: 3.5KW

Installation Instructions:

① Conduct rubber filling treatment on the damaged areas requiring repair (refer to the filling section in the vulcanization process of tape joints, or have our service personnel demonstrate during equipment debugging).

② Place the lower shelf below the repair area (evenly), on the shelf, position the water pressure plate under the tape, and the lower heating plate (above the repair area).

③ Place a heating plate, an insulating plate, and then the upper machine frame below the repaired area, aligning it with the lower machine frame.

④ Install the handle, washer, and nut and tighten securely.

⑤ Connect the control box to the power source with a single wire, and connect the heating plate to the control box with a separate wire. Ensure the connections match the labels on the control box.

⑥ Connect the pump to the pressure plate with a high-pressure hose, turn on the electric control box, and fill the pressure plate with water to the硫化 pressure.