Kunming Steel Formwork Manufacturer

Steel formwork design can be determined based on the engineering structure type and characteristics, as well as on-site construction conditions. This includes specifying the layout of the flat arrangement, the specifications and quantities of longitudinal and transverse ribs, the type and spacing of column ties, beam and slab support spacing, assembly form of steel formwork, and the calculation of the strength, stiffness, and stability of the formwork and supports. Wooden formwork has a low reuse rate and high loss. Plywood can be bent within a certain range, thus allowing for curved surface forms of various radii. Bamboo plywood has better bending properties than wood plywood, and can be used for the arched, cylindrical, and dome-shaped columns of high-rise buildings, silos, water towers, and circular piers in bridge engineering.

　　Assemble adjacent panels according to the steel template design drawings, ensuring each hole is securely fastened with U-shaped clamps. Leave clearance for cleaning during column template assembly. The pre-fabricated assembly site should be compacted and leveled. After assembly, label the steel templates, apply release agent, stack them by specifications, and place the axis, template edge lines, and horizontal control elevations. Check and correct the concrete mortar leveling layer at the bottom of the steel templates, and ensure the ground anchors used for column alignment have been pre-buried.

Items needed before steel formwork construction: documents,定型 steel form panels, large form panels, steel angle forms, positive/negative angle forms, connection angle forms. Connecting accessories, U-shaped clips, hook bolts, securing bolts, etc. Support system, steel pipe supports, column form clamps, etc.

Steel mold application scope:

1. Various types of steel required for mold processing and manufacturing; their surface quality and steel material must meet the regional standards for post-processing steel, and the carbon content of the steel should be strictly controlled when necessary.

2. The processing of steel templates must use bending on a bending machine for the panel's corner treatment. If there are no requirements for the radius of the rounded corners, the bending radius should be 1.5 times the thickness of the steel plate.

Classification of Templates

By material: Wooden molds, bamboo molds, steel-wood molds, steel molds, plastic molds, aluminum alloy glass fiber molds, and glass fiber molds, etc.

By process: there are assembled formwork, large formwork, climbing formwork, climbing formwork, sex formwork, flying form, mold shell, etc.

Template System Composition: Consists of two main parts - the template panels and the support frame. The template panels are made up of panels, secondary ribs, and main ribs. The support frame comes in various forms, including supports, trusses, tie rods, and tension bolts.

The advantages of flat steel formwork are as follows:

1. The steel mold surface is smooth and glossy.

High flexibility, easy to splice, and simple to assemble.

3. Strict process requirements, aiming for the utmost in rigor and continuous improvement.

4. Reinforced system with high component strength and large assembly rigidity.

5. High precision in panel manufacturing, tight joints, and resistance to deformation.

6. The template boasts excellent overall integrity and strong seismic resistance.