What are the advantages of carbon plates over carbon fiber?

Discussing Carbon Fiber Reinforcement,Everyone would naturally think of carbon fiber cloth reinforcement.,Actually, carbon fiber reinforcement isn't just about carbon fabric reinforcement.,Carbon fiber reinforced panels available,And carbon plates offer many advantages over carbon fiber reinforcement. Now, Caben introduces the benefits of carbon plate reinforcement.:

　　2.1Carbon fiber panels exhibit excellent load-bearing properties.

　　GB50367-2013The "Code for Reinforcement Design of Concrete Structures" explicitly stipulates::Tensile strength design values for grade 1 carbon fiber fabric and carbon fiber panels in critical components are, respectively:1600MPa、1150MPa,We are10cmWide,300gCarbon Fiber1.2mmFor example, thick carbon plates.:

　　10cmTensile force of carbon fabric calculation1600*100*0.167(300gCarbon Fabric Thickness)=26720N。

　　10cmThe tensile force of carbon plate calculation1150*100*1.2=138000N。

From the calculation results, we can observe that applying a layer of the same width...1.2mmThick carbon plates are bonded with a layer300gCarbon fiber's tensile strength5Be Dou.

　　2.2Good strength utilization rate

Above, we mentioned that the tensile strength design value for the first-class carbon fiber in critical components is1600MPa,Grade 1 carbon plate exhibits tensile strength in critical components1150MPa,The ultimate tensile strength of the first-grade carbon fiber fabric and the first-grade carbon plate, respectively, is3400MPa、2400MPaBased on the above data, we can separately calculate their intensity utilization rates.:

Carbon Fiber Strength Utilization Rate:1600/3400=47.1%

Carbon Panel Strength Utilization Rate:1150/2400=47.9%

Visible carbon panels do not fall behind in strength utilization compared to carbon fabric.

　　2.3Better control over the quality of carbon plate adhesion

Carbon panels are formed by hardening carbon fiber yarns through the use of resin impregnation.,The material itself is relatively hard.,During the adhesive application, maintain proper adhesive layer control.,Maintain proper pressure during application.,No issues with adhesive performance. During the carbon fiber cloth bonding process...,A series of common issues such as warping and bulging may arise. Moreover, the surface requirements for carbon fabric adhesion are higher compared to carbon plate adhesion.

　　2.4High tensile strength

Capone improves carbon plate machine,Enable uniform stress distribution in carbon fiber raw material,Carbon panels produced can reach“Explosive growth”The destructive test results confirm that the tensile strength of the carbon plate is consistently maintained.2800MPaAbove,Exceeds national standards by a significant margin.

　　2.5Colloids exhibit good thixotropy.

Capone's carbon plate adhesive performs under harsh conditions,Maintains excellent touch sensitivity and mechanical properties.,2017Last winter, temperatures were close to freezing.10℃In such circumstances,A bridge in Tianjin has adopted Cabot's low-temperature carbon plate adhesive.,Excellent thixotropy,And the mechanical properties meet the national standards requirements.,The project has received the client's approval during the construction process.

　　2.6Carbon Plate Specifications Vary

Generally, manufacturers can only produce...5cmNo Chinese content provided.10cmWide Carbon Plate,And Caben can produce widths ranging from2cm、5cm、10cm、15cm、20cmMultiple widths of carbon plates;Thickness specifications are generally only produced by manufacturers.1.2mm、1.4mm、2.0mmAnd3.0mmCarbon Plate,And Capben can also produce...4mmThick carbon plates. For other specifications, please consult Kaben.,Kapben can also manufacture carbon plates in other specifications according to customer requirements.