详情描述

The geomagnetic vehicle detection system consists of a geomagnetic vehicle detector, a receiver host for the geomagnetic vehicle detector, and a processing mainboard for the signal machine vehicle detector. This system is primarily used for traffic management vehicle detection, adaptive control of signal machines, and real-time traffic flow statistics at intersections.


Advantages


· Easy installation without cutting the road surface or requiring any高空work vehicles. Just drill a 108mm diameter, 126mm deep hole on the road, 20 meters behind the parking line. If there's a waiting area in the lane, drill the hole 6 meters behind the parking line (or calculate from the waiting area, drilling between the third and fourth vehicles).

· No relay equipment required; the geomagnetic vehicle detector communicates directly with the receiver.

· Utilize full-body antennas for signal transmission; antennas can be mounted freely without directional restrictions.

· Long transmission distance; the distance between the ground magnetic vehicle detector and the receiving antenna exceeds 200 meters.

· Signal machines do not require wake-up time after power failure, and vehicle signals can be detected at any time after installation or after power is off/on.

· Long lifespan; vehicle detector in sleep mode when no vehicle is present, active when a vehicle is there, current less than 1mA, significantly lower than the industry standard of "greater than 20mA."

· The product development referenced products from domestic and international manufacturers, integrated their strengths and weaknesses, and introduced innovations.

· The product is unaffected by weather conditions such as rain, snow, fog, etc.

· Test rate up to 99%.




Applicable

Vehicle Detectors are suitable for the following applications:

Traffic information collection at city intersections and highway toll plazas, including vehicle flow, occupancy rate, queue length, and speed.

Parking lot automatic control or management fee

Residential, office, industrial, etc., traffic access control and charging systems.

Detect the presence of metal objects.

Inspection Report