Polishing Dust Removal Equipment

One, Dust removal equipment comes in various types, with different models, specifications, structural performance, and functional features. It is essential to carefully read the manual before use to avoid damage to industrial vacuum cleaners and potential safety hazards to the user. Two, The operating environment temperature for standard industrial vacuum cleaners should not exceed 40 degrees Celsius, and the workplace should not be above 1,000 meters in altitude. There must be good ventilation, and the environment should not contain flammable or corrosive gases. Three, Dry dust removal equipment is not allowed to suck water, and wet hands should not operate the vacuum cleaner. If there are large paper balls, plastic sheets, or debris larger than the tube diameter in the area to be cleaned, they should be removed in advance to prevent clogging of the tube. Four, Connect the ground wire to ensure electrical safety. General industrial vacuum cleaners should not operate continuously for more than 8 hours to prevent motor overheating and damage. Specially designed industrial vacuum cleaners with a custom cooling system can operate continuously for 36 hours without interruption and can be used with machine tools. Five, When using an industrial vacuum cleaner with an automatic winding device, pull out the power cord to the sufficient length needed, do not pull it out too much. If you see yellow or red markings on the power cord, stop immediately to prevent overextension. To rewind the power cord, simply press the button, and it will retract automatically. Six, Avoid overextending and bending the industrial vacuum cleaner's flexible hose or folding it frequently, as this can affect the hose's lifespan. Seven, Check for any damage or exposed wires on the power plug and cord of the dust removal equipment; electrical leakage can damage the industrial vacuum cleaner's motor. Eight, When moving the dust removal equipment, be cautious to avoid impacts to prevent damage to the vacuum cleaner's drum, which can lead to a decrease in suction power. Nine, Store the machine in a well-ventilated and dry place when not in use. Do not support continuous long-term operation of industrial vacuum cleaners; operate within the supported working time to avoid overloading, which can affect the vacuum cleaner's lifespan. Ten, If the dust removal equipment's main unit heats up, emits a burning smell, or there are unusual vibrations and noises, immediately shut down the machine and have it repaired; do not overuse the industrial vacuum cleaner.