Asbestos-cement cable protection pipe

Asbestos-Cement Cable Protection Pipe Product Introduction:

Standard Length: 4 meters (±20mm)

Bend Radius: ≤10mm

Flexural load test: No damage occurs under a load of 6800N

External Pressure Load Test: No damage occurs under 19,000 load

Friction coefficient: ≤0.31

Moisture Absorption: ≤21%

Permeability Resistance: Take two 100mm long specimens, immerse them in 23℃ fresh water for 1.5 hours, then place them in a -20℃ low-temperature environment, and remove them after 1.5 hours as one cycle. A total of 25 cycles are performed, and no delamination or cracking is observed on the specimen surface.

Freezing Resistance: Take two 100mm samples, immerse in 23℃ freshwater for 1.5 hours, then place in a -20°C low-temperature chamber, remove after 1.5 hours as one cycle, a total of 25 cycles are conducted, no delamination or cracking is observed on the sample surface.

Model: Available in ABC two types

Wall Thickness: 12mm, 14mm, 16mm

Net Weight: 55kg, 66kg, and 85kg

　　Application: This product is primarily used for municipal engineering, power engineering, road cable line renovation projects, etc.