A full range of SanTong models available

Cold Bending Tee - This consists of a main pipe with a smaller branch pipe attached. Clearly, the two larger sizes are the main pipes, while the smaller size branching off is the branch pipe. In pure oxygen pipelines, there is usually pressure, which increases the oxygen's reactivity. If a cold-bent tee is used, any debris moving with the oxygen stream may, due to changes in pipe diameter, alter the flow rate, potentially causing collisions with the pipe that could ignite a fire source or static discharge caused by the flow rate changes, both of which could lead to the combustion of the pure oxygen pipeline.

The cold drawing three-way pipe fitting processing method is: mark the location on the pipeline where the cold drawing three-way is to be processed, and then punch a hole at the marked location.

Specialized equipment for cold drawn tee pipe fittings: The device includes a piercing unit mounted on the pipe, comprising a metal rod, a presser, a reverser, and a bracket; the metal rod is heated, and as the jack and the metal rod push outward, the material of the pipe wall naturally flips out to form a cold drawn tee blank; then, a pipe section of a certain length and corresponding specification is welded to the pierced shape.

Produced final products from cold drawn pipe fittings blanks.