FT-102A Series Vibrating Funnel (Vibrating Sifter) Loose Bulk Density Tester

FT-102ASeriesVibration Funnel（Vibration Screen）Loose Density Tester

Function Description:Function description

Suitable for materials that cannot freely flow through a funnel with an orifice size of5.0mm funnelPowders and granules。

Not suitable for metal powders that are prone to breakage during the vibration process.(As specified in GB/T1479.2, this method is stipulated for the determination of the bulk density of the powder.)

Refer to StandardsReference standards

FT-102ASeriesVibration Funnel（Vibrating Screen）Loose Density Tester

Function Description:Function description

Suitable for materials that cannot pass through the orifice of the funnel method5.0mm funnelPowders and granules。

Not suitable for metal powders that are prone to breakage during the vibration process.(As specified in GB/T1479.2, this method is stipulated for the determination of the bulk density of the powder.)

Reference StandardReference standards

GB/T 1479.3-2017Metal powder Determination of Bulk Density Chapter3Partial: Vibration Funnel Method

ISO 3923-3:1980Determination of Apparent Density of Metal Powders3Partial:Oscillating Funnel Method

SJ/T 10215-1991 Determination of Bulk Density of Magnetic Oxide Powders-Vibration Funnel Method

GB／T31057.1-2014Physical Properties Testing of Granular Materials1Measurement of bulk density（Vibration Sieving Method）

PrinciplePrinciple

Vibrate under specified conditions to allow the powder to freely fall from the funnel, filling the cylinder cup of a known volume, and express the loose bulk density of the powder as the mass per unit volume.；Utilize vibration structure to assist in the flow of powders and granules out of the funnel, simulating production processing conditions to aid in the flow and filling of raw materials.

Parameter Data

FT-102ASeriesVibration Funnel（Vibration Screen）Loose Density Tester

Function Description:Function description

Applicable for materials that cannot freely flow through a funnel with an aperture of5.0mm funnelPowders and granules。

Not suitable for metal powders that are prone to breaking during the vibration process.(As specified in GB/T 1479.2, this method is provided for the determination of the bulk density of the powder.)

Refer to StandardsReference standards

GB/T 1479.3-2017Metal powder Determination of Bulk Density Chapter3Partial: Vibrating Funnel Method

ISO 3923-3:1980Determination of Apparent Density of Metal Powders3Partial:Oscillating Funnel Method

SJ/T 10215-1991 Determination of Bulk Density for Magnetic Oxide Powder-Vibration Funnel Method

GB／T31057.1-2014Physical Properties Testing of Granular Materials1Measurement of bulk density（Vibration Sieving Method）

PrinciplePrinciple

Vibrate under specified conditions to allow the powder to fall freely from the funnel, filling the known volume of a cylindrical cup, and express the loose bulk density of the powder as the mass per unit volume.；Utilize a vibration structure to assist in the flow of powders and granules out of the funnel, simulating production processing conditions to aid in the flow and filling of raw materials.

Parameters and specifications