详情描述

FT-100H Series Automatic Powder Compaction Density Gauge

Feature Description:Function description

Adopt71寸touch screenPCSoftware control; the load unit control system collects stress change data, pressure and time data can be set.Sample thicknessDirect read, automaticAndManual operation mode coexists;Vacuum Forming MoldsStandard ConfigurationPCSoftwareAnalyzeStress、Density、TimeDisplacementProcess Data MapNew energy battery materialsR&D (Research and Development)Quality and craftsmanshipEstablish data models.Supplying China/Please provide the Chinese content to be translated into American English.

WorkPrincipleOperational principle

FT-100H Series Automatic Powder Compaction Density Gauge

During the compression process under external force, as the powder moves and deforms, larger voids are filled, the contact area between particles increases, causing an attraction between atoms and strengthening the mechanical wedging between particles, thereby forming a compact with higher density and strength..

Refer to StandardReference standards

GB/T 30835-2014 Lithium-ion battery anode material with carbon composite lithium iron phosphate

GB/T 30836-2014Lithium-ion battery-grade lithium titanate and carbon composite anode materials

GB∕T 24533-2019 Lithium-ion battery graphite anode materials

GB/T 44330-2024Lithium-ion battery cathode material - Determination of powder compaction density

GB/T 41232.2-2021/IEC/TS 62607-4-2:2016

Nano manufacturing Key Control Features Nano-energy storage Section2Partial: Density testing of nano cathode materials

Can also be used for the determination of compaction density of powders and granules with similar properties.

 FT-100H Series Powder Automatic Compaction Density Meter


Testing Items

FT-100F-5T Upgrade Model

1. Main pressure

5 tons

2. PowerSystem

Servo Power

3.Displacement Measurement

Positioning sensor systemItinerary0-20mm,Resolution0.001mm

4Display Method

7-inch touch screen + PC software

5.Mold

 

5 tonsStandard ConfigurationInside Diameter:13mmOptionalInside Diameter12.8mm,15mm；16mm；20mm）

Note: Molds are consumables, standard configuration upon shipment1 set, available for spare order 

6Molding release method

Automatic

7Protective Device

Automatic diagnostics, overload protection, and emergency stop control

8.Time Setting

Constant Pressure Time0-99.9S；0.1S

9Density Value

99.99999g/cm3

10Variable shape

Measurable deformation of elastic materials0.01%----50%

11Balance(Select)

0.00001g, Range: 120g

12Displacement Speed

Less than15mm/minResolution0.1mm/min

13Power Supply

220V/380v

14.Overall error

Sample CharacteristicsDifferenceDensity≤1%

15. Selection Items

a. Extended Warranty Service; b. Measurement Services; c. Computers and Printers; d. Vacuum Packer; e. Molds