详情描述

FT-201A Series Conductor Powder Resistivity Tester, Automatic Pressure Application

I. OverviewOverview：

UtilizingPCSoftware automatically measures and reads the height and real-time resistance during the sample compression process./Resistivity/Conductivity process data.Automatically generate reports, describe process change curve charts, automatically step-up pressure, automatic demolding, automatic constant pressure measurement.USBAnd232Communication port, four-point measurement mode, constant current source measurement, automatic gear shift, selectable pressure range, brass-copper electrodes, rotating electrode structure, easy operation.

Section II: Application ScopeScope of application：

Conductive powder requiring electrical property analysis, such as for lithium battery materials, graphene, graphite, carbon powder, coking, petrochemical, powder metallurgy, and related production and processing departments; universities, research institutions, quality inspection agencies, quality management departments, R&D departments, etc.

FT-201A Series Conductivity Powder Resistance Meter Automatic Pressure Application

Section 3: Reference Standards:

1）GB∕T24521-2018Carbon raw material and coke resistivity measurement method;Pressure requirements3.9MPa±0.03MPaPowder mold inner diameter16mm-16.3mmHeight Measurement Range:15-17mmTest Current500mAThese parameters dictate instrument selection.b.Height Measurement Range:0.001-25.000mmPressure Rangea.200kg；b.Mold Internal Diameter16-16.3 mmMold stroke height25mm）.

2）.YS/T 587.6-2006 Testing Method for Calcined Petroleum Coke Used in Carbon Anodes6Measurement of Partial Powder Resistivity;

 ISO 10143-1995 Determination of resistivity of calcined coke particles for aluminum production electrode materials ；

Requirements:c.Mold Internal Diameter30mmPressure requirements3 MPa±0.03MPa（300kgRange);c.Mold Internal Diameter30mm；

3Particle characteristics factors external,During the powder resistivity test process,Pressure and mold cavity volume determine the effect of compaction density on powder conductivity..In addition to standard requirements,; Suggest selecting small mold cavity sizes..

FT-201A Series Conductor Powder Resistivity Tester, Automatic Pressure Application


Model and Specifications

FT-201A

1.Resistor

10^-7～2×10^7Ω

2.Resistance range

10^-7～2×10^7Ω-cm

3.Conductivity

5×10^-7～10^7s/cm

4.Test Current Range 

1μA，10μA，100µA，1mA，10mA，500mA ,1000mA 

5.Voltage Measurement Range

Voltage Range:2mV  Resolution20mV 200mV 2V：0.1uV  Measurement Accuracy±（0.1%）

6.Current Accuracy

±0.1%

7.Resistance accuracy

≤0.3%Standard Resistor,Resolution0. 1μΩ

8.PCSoftware Interface

Resistance value, resistivity, conductivity value, temperature, pressure value, automatic unit conversion, cross-section, height, curve charts, reports, compaction density.