Laboratory Lithium-ion Battery Blender

CR-type High-Power Mixer is used in the production process of graphite electrode and cathode.

Heating: Directly heats carbon particles with the special CO-NEL heating device, eliminating all the disadvantages of uneven heating in traditional processes, significantly improving heating efficiency, from around 45% in indirect heating to 92%.

The raw materials and other components are accurately fed into the CR-type high-force mixer through an automatic batching system after being heated to the process temperature. Due to the unique countercurrent mixing principle of the CO-NEL high-force mixer, various components can achieve uniformity in a short time.

Cooling: Regardless of the electrode shaping method, whether extrusion or vibration, cooling of the solder paste is required prior to shaping. The solder paste can be cooled to the preset value through the CO-NEL strong mixing machine and the evaporation cooling system. Another advantage is that during the cooling process, the paste material receives additional kneading, resulting in a more uniform consistency.

Intermediate storage and feeding: The temperature-controlled disk feeder mounted on the load sensor accurately feeds into the molding press.

Complete preparation system: A complete raw material preparation system for producing graphite electrodes or cathodes usually employs batch production, with a production capacity of approximately 2-18T/H per unit of equipment.

Electrodes for both wet and dry processing

Intermediate Storage and Feeding: A temperature-controlled disc feeder mounted on a weighing sensor feeds the forming press. Complete raw material preparation system: A full raw material preparation system for producing graphite electrodes or cathodes is typically for batch production, with a production capacity of approximately 2-18 T/H per unit.

The preparation of battery slurry involves blending technology.

Battery paste preparation is one of the most demanding tasks in the blending technology field. That's why KONIPEL CO-NEL's technology is considered indispensable by domestic and even international battery manufacturers. In the current domestic battery manufacturing sector, buyers cannot find a comparable blending technology to KONIPEL CO-NEL anywhere else in the country! KONIPEL CO-NEL's lithium battery blending technology has always been highly profitable!

Electrodes for both wet and dry processing

Konile CO-NEL can integrate a complex process (4-hour duration) into a single process unit for operation. (Within 20 minutes)

The CO-NEL pulper by Konele is different from other types of mixing systems on the market, featuring a rotating mixing disk and eccentrically positioned mixing tools! During mixing, the mixing disk pushes the material towards the rotating rotor, eliminating any dead spots. Fixed multi-functional scrapers guide the material near the mixing disk back into the material flow. This means that the CO-NEL mixing rotor by Konele does not also need to be used for conveying material as in other mixing systems. It achieves optimized adjustment based on the different material tasks, through its geometric characteristics and speed. The rotor speed range is 1-40 m/S, which can be adjusted at different stages via a variable frequency drive to achieve unprecedented process variations!·Very short batch processing time (minutes instead of hours)·Lower energy consumption compared to current advanced technology·More uniform, increasing the potential for battery capacity·Reduced investment - less space - lower operating costs·Suitable for (extrusion - dry coating - pressing)·Can be used for all-solid-state batteries