- AllProduct Category
-
Laboratory Waste Gas Treatment System
Lab Renovation and Decoration Project
Laboratory Pure Water System
Cleanroom Laboratory Engineering
Lab Gas Supply System
Lab Ventilation System
Lab Bench Series
Cabinet Series
Ventilation Cabinet Series
Lab Accessories Series
详情描述
Cleanroom Workbench
The main functions and design scheme of the laboratory bench control system:
1. Utilizing a closed-loop control system, information from the system operation is collected via sensors and other acquisition systems. The collected data is then input into the computer via a data acquisition card, where it is displayed and calculated according to control requirements. Subsequently, control signals are output, processed by the data acquisition card into signals recognizable by the actuator, and finally, system control is achieved through the actuator's operation.
2. Utilizing a centralized computer control system with PLC hardware and a WINDOWS software platform. During the signal collection process, we collect both digital and analog signals, so we must first convert the analog signals into digital signals that the PLC can process. After processing by the PLC, some of the output signals need to be converted back into analog signals to control the experimental bench. This requires both A/D and D/A conversions. Therefore, a data acquisition card integrated with these two functions is needed to achieve both conversions.
询价单
