Steel and wood laboratory bench

Steel and wood laboratory table

Key Points for Changing the Top of a Steel and Wood Structural Lab Bench:
1. Prior to installing the new countertop, chemical reagents stored in the lab must be removed, and large experimental equipment should be properly wrapped and sealed to prevent dust from operations like glue application, hole cutting, and sanding from entering the instruments.
2. Scratches or cracking on the countertop can be repaired by the maintenance personnel from the lab table manufacturer through bonding, sanding, polishing, and waxing. After repair, it should be usable as normal. However, the mechanical strength of the epoxy resin board is poor, making it difficult to repair. It's recommended to replace the countertop directly instead.
3. Due to the varying manufacturing processes and standards among different lab bench manufacturers, the cabinet bodies and countertop structures also differ slightly. Therefore, to ensure the efficiency and longevity of the countertop installation, it is recommended to contact the original manufacturer for repairs and replacements.
4. When replacing countertops of different materials, consider issues such as the edges, corners, and joints.
Warm reminder: The new steel-wood laboratory table top should be left to dry and cure for 24 hours before use.