What are the specific steps involved in checking the unloader?

The unloading machine, as the name implies, is a vehicle unloading device specifically designed for heavy-duty truck unloading. It features multiple hydraulic cylinders for support, offering low pressure, smooth operation, low failure rate, and a level platform with no obstructions upon reset, making it easier for vehicles to enter the platform. When not in use, it can serve as a passage for vehicles. This equipment is widely applicable in industries such as flour, starch, feed, and alcohol. To ensure long-term stable operation, regular maintenance and inspections are essential for machinery and equipment.

Here are the summarized inspection steps for your reference:

One, inspect for any leakage in the hydraulic flip valve oil pipeline.

Ensure that the nuts at each intersection point "f" on the hydraulic unloading crane arm架 are secure, and whether lubricant has been applied before use.

During the motion process and when in the ascending position, the hydraulic flip plate must not be moved.

Do not alter the hydraulic flip plate electrical control system at will.

Upon completion of work, ensure all parts of the hydraulic flip plate are kept clean and lower the workbench to its stop height. When not in use, avoid exposure to sunlight and rain, and slightly raise the support legs to prevent tire damage from prolonged disuse. Check the hydraulic oil quality and level monthly; during the entire lifting process of the lift, the hydraulic oil level should be 40-50MM above the bottom of the box. If the hydraulic oil appears dark, sticky, or contains sand, it should be replaced promptly.

Six, when entering for maintenance under the hydraulic unloading machine, the work platform must be hoisted to prevent sudden collapse of the hydraulic flap, which could cause injury or death; before dismantling the hydraulic system, pressure must be released first to avoid oil spray and the sudden sliding of the hydraulic flap.