How to Efficiently Utilize High Viscosity Gear Meter Pumps

Within the extensive family of gear metering pumps, there is a particularly common type known as the high viscosity gear metering pump.

High-viscosity gear metering pumps are specifically designed for the conveyance, pressurization, and metering of high-viscosity liquids. By utilizing special structural materials, setting end face clearances, and selecting other options, these high-viscosity gear metering pumps are suitable for use in production lines with viscosity and high viscosity, such as resin, adhesive, papermaking, chemical fiber, granulation, plastic film, sheet materials, plate materials, profile materials, tubing, wire drawing, and composite extrusion.

Understanding the high viscosity gear metering pump and its working principle, let's now delve into how to use the high viscosity gear metering pump efficiently.
Regularly check the liquid level in the tank during operation and ensure that it does not drop too low, as low liquid levels can cause the pump to run dry, which may damage the shaft seal and other components.
2. The medium being conveyed must not exceed the pump's design viscosity range.
Maintain the cleanliness of the liquid tank to prevent the entry of impurities into the pump, which may affect the pump's lifespan.
4. For extended parking, please pump out the relevant solvent to thoroughly flush and seal the pump to prevent the conveyed material from solidifying inside.
5. Should you need to alter the pump's application or the conveying medium, please consult the supplier for relevant technical details.
6. If the motor is a DC motor, do not connect it directly to AC power.