Product Description:

EZ-10 Metal Wire Twisting Tester is a new digital-counting wire twisting tester developed by our company, primarily used for the torsion testing of metal wires with diameters ranging from Φ3 to Φ10 mm. It is designed to measure the ability of metal wires to withstand plastic deformation in single or double twisting and to reveal surface and internal defects of the wires. It provides a reliable measurement method for wire production and usage units.

Main technical parameters and working conditions:

Two collets coaxiality < 0.4

2. Straightness of the mobile guide rail over the full length is less than 0.2

3. Spacing between two clamps ≥ 550

4. Rotational Speed: 30 RPM ±10%, 60 RPM ±10%

5. Clamp jaw hardness HRC 55-65

6. Weights tolerance ±0.01%

7. Test machine operating noise < 70 dB

8. Environmental & Working Conditions

8.1 Temperature: 10-35℃

8.2 Place on a stable base, with a levelness of <0.2‰

8.3 In a vibration-free environment

8.4 No corrosive media surrounding

8.5 Power Supply  Three-Phase Four-Wire  380V  ±10%  50Hz

Product Images:

Main Technical Parameters and Working Conditions:

1. Two-jaw chuck coaxiality < 0.4

2. The straightness of the mobile guide rail over the full length is less than 0.2.

3. Spacing between two clamps ≥ 550

4. Rotational Speed: 30 RPM ±10%, 60 RPM ±10%

5. Clamp jaw hardness: HRC 55-65

6. Weighing chips tolerance ±0.01%

7. Test Machine Operating Noise < 70 dB

8. Environmental and Working Conditions

8.1 Temperature: 10-35℃

8.2 Place on a stable base; the horizontal level is less than <0.2‰

8.3 In a vibration-free environment

8.4 No corrosive media in the vicinity

8.5 Power Supply - Three Phase Four Wire - 380V ±10% - 50Hz