HBW Counter-Flow Closed-Circuit Cooling Tower

HBW Counterflow Closed Circuit Cooling Tower

I. Design Concept

The HBW reverse flow closed-loop cooling towers utilize mature induced draft design. Jiangsu Hua Tower employs two design types: the reverse flow tower with air intake at the bottom of the tower and the reverse flow tower with air intake at the middle of the tower. The reverse flow design increases the temperature difference between the recirculating spray water and the process hot fluid inside the pipes, thereby enhancing cooling efficiency and reducing the overall design cost. It features a small footprint, compact scaling, and outstanding anti-freezing performance.

Section 2: Working Principle

The working fluid (pure water or other liquid) circulates through the coil in the closed cooling tower, with its heat dissipating into the water flowing through the coil. Simultaneously, air outside the unit enters from the bottom inlet, crossing the water flow direction and flowing against the coil. A small portion of the water evaporates, absorbing heat, and the warm, moist air is exhausted into the atmosphere by the fan at the top of the cooling tower. The remaining water falls into the bottom sump and is recirculated back to the water distribution system by a pump, then sprayed back onto the coil after pre-cooling through the packing.

Section 3: Counterflow Closed Circuit Cooling Tower Capacity

The Whatair counterflow closed-loop cooling tower utilizes magnesium-aluminum-zinc coated steel plates as the base material for the tower body, offers a variety of coil coolers for selection, and partners with reputable motor manufacturers across multiple brands.

Closed-loop counterflow cooling towers are used in areas ranging from Qiqihar at -40℃ to Hainan Island, covering almost all regions. This tower type is suitable for applications in industrial and HVAC fields, including water, water solutions, hydraulic oil, quenching oil, electroplating solutions, wastewater, etc., and can withstand an incoming water temperature as high as 90°C. The flow rate range per unit is from 1.6L/s to 138.8L/s, particularly suitable for environmental protection fields such as sludge drying, solid waste treatment, and wastewater treatment.

Four, HBW Type Counter-Flow Closed-Circuit Cooling Tower Product Advantages

1. Technologically mature, Jiangsu Huata has developed a counter-current closed-loop cooling tower with central air intake. By innovatively introducing packing, the heat exchange efficiency of the counter-current closed-loop cooling tower is significantly improved, allowing it to excel even in extremely cold regions.

2. New ISO full-process coverage, high standardization and automation levels

The HBW type counterflow closed cooling tower, as the flagship product of Jiangsu Huata, is incorporated into our company's standardized production system. It features high standardization, high automation, and a fully mature tower design, covering a range from 6m³/h to 500m³/h per unit. Special customization is available based on the customer's on-site requirements, with automatic folding and stamping by South Korea's AMADA, allowing for both standardization and customized options. The selection of cooling towers for each project is optimized using dedicated calculation software, with the design plans analyzed and filtered for accuracy and reliability.

3. High-performance components — lifespan of over several decades

To ensure the long-term stable operation of closed-loop cooling towers, our company adheres to the stringent ISO9001 international quality assurance system procedures in every stage of design, material selection, production, and outsourced components. We strictly comply with all specifications to meet the product's design operational requirements. A rigorous four-step quality inspection process guarantees the long-term safe operation of components. Our products are exported worldwide.

4. Features of HBW type counterflow closed-loop cooling tower

The Jiangsu Huata HBW type counter-current closed tower is available in all models, with a wide capacity range (processing flow rate of 6-500 tons), offering extensive versatility to meet various application requirements; it occupies a small footprint, suitable for large multi-module projects; an anti-icing device reduces issues with winter icing; it operates reliably, with a direct-connected fan that requires no maintenance, an automatic de-icing system with stable performance, capable of continuous operation, and has advantages in industries such as coal chemical, metallurgy, thermal power plants, environmental protection, and oil.