Proper Usage of Stainless Steel Waterproof Fittings

The primary function of the stainless steel waterproof connector is to maintain the unimpeded flow of the cable line. To achieve this effect, the cable must be kept in an airtight state, ensuring the insulation level at the connection point, thereby guaranteeing the cable operates safely and stably. If there are leakage points, moisture may accumulate inside the cable, leading to a decrease in the insulation performance at the connection. To ensure the cable can be used normally, the connector must be used correctly. Below is a simple introduction to the proper usage of the connector.

When using connectors, ensure that both the shape and size match. When stripping cables, use specialized cutting tools as much as possible. After roughly shaping, trim the burrs on the edges to ensure a smooth connection point.

The role of metal shielding in cables and joints is to conduct short-circuit currents caused by cable faults and to shield electromagnetic fields from generating electromagnetic influences on equipment. Under normal operating conditions, the metal shielding is in a relatively good grounding state and maintains zero potential. In the event of a cable fault, the metal shielding can conduct short-circuit currents in a very short time. Note that the grounding wire must be reliably welded.

Three, ensure daily sealing and protection measures are in place, as this allows for the cables to operate safely for a longer period. Pay special attention to preventing moisture, water, and dampness from渗入 the joints. To this end, we can construct a joint protection trough or install a concrete protective box.

In summary, when using stainless steel waterproof connectors, the correct method must be employed to ensure the safe operation of the cables.