What to Consider When Using Oil-Free Air Compressors

What to Note When First Using an Oil-Free Air Compressor? For some air compressor users, this question is definitely of greater concern, as...

For maintenance personnel working on installing and maintaining air compressors, this is essential knowledge. Work environment, pressure, temperature, voltage.

Potential issues may affect the normal operation of oil-free air compressors. Below, we will specifically analyze the points to be noted when initially commissioning an oil-free air compressor.

Oil-free air compressors should not be placed near flammable, explosive, or chemically corrosive materials.

2. Remove sleepers, underlaying timbers, clamps, and other supporting materials, as well as any debris present on the site.

Ensure the oil level in the air compressor is adequate; otherwise, it may cause high temperatures, severely damaging the rotor.

4. The qualification of safety interlock devices, such as temperature, pressure, pressure differential, loading and unloading solenoid valves, motor overcurrent, under-voltage, etc.

5. Water-cooled air compressors require the water lines to be connected.

6. Verify the correct installation of the oil and gas pipes.

7. Inspect the screw air compressor's local control panel and installation equipment for proper functioning, and ensure the alarm indicator lights are displaying correctly.

8. Test the set values for motor overload protection and inspect that the wiring is properly connected in compliance with safety regulations.

Here are the key points compiled by GMK Air Compressors regarding what to consider before the first-time use of oil-free air compressors, hoping that maintenance personnel will follow proper procedures.

Software for installation and detection.