Design Requirements for Doors and Windows

First and foremost, as a sizing personnel, it is essential to ensure the rationality of door and window design, allowing villa and mansion projects to showcase the superior performance of doors and windows (transparency, ventilation, and grandeur).

2. Design the window placement based on the size of the aperture; sizes (reference data):

The A.T55 series casement windows feature a reasonable opening size: width between 500mm-600mm and height between 1300mm-1450mm.

HT55 Series Sliding Door Sizes: Width 800mm-900mm, Height 2100mm-2300mm

The B.T90 series sliding doors offer a reasonable opening size: width between 800mm-1000mm, height between 2100mm-2300mm.

C.T80 Series Sliding Doors: Recommended Opening Dimensions: Width 800mm-1200mm, Height 2200mm-2500mm

The D.T120 series sliding doors feature a reasonable opening size: width between 900mm and 1350mm, height between 2200mm and 2700mm.

E. Sunroom Roof: Visible Light Transmission Controlled Between 900mm and 1000mm

3. Fixed position socket or corner rectangular conduit connection:

A. Standard Type Materials with Fixed Position Frames

B.T50 Series: 76×44扁通, 1.5mm thickness

HT90 Series: 100×50 Flat Tube with 1.5mm Thickness

C. Corner passage connection method:

The T50 series and HT90 series feature connections in thicknesses of 1.5mm, including 50x50, 70x25, 100xP25, 100x50, and 100x100.

The T80, HT55, and HT120 series utilize dimensions of 60×60×2.0mm, 80×65×2.5mm, 100×50×3.0mm, and 100×100×3.0mm.

110x65x3.0mm, 120x60x4.0mm, etc. standard materials

When using fixed positions on large facades, pay attention to determining the stress points of horizontal and vertical materials to ascertain the main material connection positions.

4. For larger width sizes of casement or sliding doors (windows), the fixed installation must utilize W-shaped spacers to divide the fixed glass into two sections. This prevents the casement window from swinging open and the sliding door (window) from sagging in the horizontal material, which would make it impossible to push the door (window) panel.

Outdoor corridors should preferably use sliding doors (without affecting passage).

b) For the outdoor suspended lower fixed position, tempered glass with interlayer film must be used (for floor-to-ceiling window security - full).

c) At windy locations on mountain peaks and by the seaside, windows should be oversized and equipped with flat spacers and thick laminated glass. (Width ≥ 3500mm, Height ≥ 3500mm)

F. Bathroom shower room, featuring frosted glass.

Please indicate the window sill height, and pay attention to the handle position height (a reasonable range is between 1500mm to 1700mm from the finished surface to the handle).

Air tightness of doors and windows is crucial for maintaining indoor insulation, heat preservation, and noise reduction; it must be paid close attention to during the design phase.