Axial Flow Fan T30

The T30 series fans are divided into nine models (NO: 3-10) based on the impeller diameter, with each model typically featuring 4 blades (3 or 6 blades can be made upon customer request). Each model can be produced in 1-4 different angles, and the impeller's peripheral speed generally does not exceed 60 meters per second.
The T30 series fans, with different blade numbers, installation angles, and rotational speeds for each model, exhibit varying total pressure and airflow. The T30 series fans with four blades have a higher total pressure of 350Pa, and the maximum airflow can reach up to 47,000 cubic meters per hour.
Purpose
The T30 series axial fans are low-pressure axial fans with a simple structure and low noise. They are suitable for ventilation and air exchange in factories, warehouses, offices, and residential buildings, enhancing heat dissipation of radiators, and can also be mounted on the shielded casing for installation in exhaust ducts to increase the total pressure within the pipes.
The gas must be clean and dry, free from condensate, water vapor, and corrosive gases, with the ambient temperature not exceeding 45°C.